fix(asahi): set hardware.asahi.enable explicitly

Upstream will stop defaulting hardware.asahi.enable to true and currently emits an evaluation warning to that effect. Set it explicitly on the lyrathorpe-mbp (MBP-Asahi) host to silence the warning and be robust to the future default change. Verified the warning no longer appears in the host toplevel eval.

.gitea/workflows/ci.yaml

@@ -1,15 +1,21 @@
-# Flake CI: full `nix flake check` (formatting + deadnix + statix + pre-commit)
+# Flake CI. Formatting (treefmt) runs on *every* PR; the heavier Nix work
-# plus an explicit per-host evaluation pass for granular output.
+# (deadnix/statix/pre-commit lints + per-host evaluation) runs only when the
+# change can affect it.
 name: CI
 
 # Deliberately no `paths:` filter. This job is a required status check on main,
 # and a path-filtered workflow is *skipped* (never runs) for PRs that touch no
 # matching file -- which leaves the required check pending forever and blocks the
 # merge (e.g. a .renovaterc.json-only change). So the workflow always runs and
-# always reports. To avoid burning a full Nix evaluation on changes that can't
+# always reports.
-# affect it, the "detect" step below diffs the PR and the heavy steps run only
+#
-# when a .nix file, flake.lock, or this workflow changed; otherwise they skip and
+# Two tiers of checks:
-# the job still passes. The required check is therefore always green-reportable.
+#   * Formatting always runs. treefmt covers Markdown, YAML, and JSON as well as
+#     Nix and shell, so a docs- or config-only PR must be format-checked too. It
+#     is cheap (no host evaluation).
+#   * The heavy steps (full `nix flake check` + host evals) run only when a .nix
+#     file, flake.lock, or this workflow changed; otherwise they skip and the job
+#     still passes, keeping the required check green-reportable.
 on:
   push:
     branches: [main]
@@ -25,11 +31,10 @@ jobs:
           # Full history so the detect step can diff the PR against its base.
           fetch-depth: 0
 
-      # Decide whether the Nix steps need to run. On a pull_request, diff the PR
+      # Decide whether the *heavy* Nix steps need to run. On a pull_request, diff
-      # against its base and look for files that can affect the flake: any .nix,
+      # against the base for files that can affect them: any .nix, the lockfile,
-      # the lockfile, or this workflow. On any other event (push to main) always
+      # or this workflow. On any other event (push to main) always run. The
-      # run. The job itself always succeeds, so the required status check is
+      # formatting step below is unaffected -- it always runs.
-      # reported even when the heavy steps are skipped.
       - name: Detect Nix-relevant changes
         id: detect
         run: |
@@ -45,16 +50,16 @@ jobs:
           echo "Changed files:"
           echo "$changed"
           if echo "$changed" | grep -Eq '(\.nix$|^flake\.lock$|^\.gitea/workflows/ci\.yaml$)'; then
-            echo "Nix-relevant changes found: running checks."
+            echo "Nix-relevant changes found: running heavy checks."
             echo "run=true" >> "$GITHUB_OUTPUT"
           else
-            echo "No Nix-relevant changes: skipping checks (job still passes)."
+            echo "No Nix-relevant changes: heavy checks skip (formatting still runs)."
             echo "run=false" >> "$GITHUB_OUTPUT"
           fi
 
+      # Nix drives the formatting check, so install it unconditionally.
       - name: Install Nix
-        if: steps.detect.outputs.run == 'true'
+        uses: cachix/install-nix-action@a49548c11d9846ad46ecc0115273879b045f001c # v31
-        uses: cachix/install-nix-action@8aa03977d8d733052d78f4e008a241fd1dbf36b3 # v31
         with:
           extra_nix_config: |
             experimental-features = nix-command flakes
@@ -62,6 +67,13 @@ jobs:
             substituters = https://cache.nixos.org https://nix-community.cachix.org
             trusted-public-keys = cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY= nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs=
 
+      # Always run: treefmt formats Markdown/YAML/JSON (docs + config) as well as
+      # Nix and shell, so documentation-only PRs are format-checked too. This is
+      # the cheap gate (no host evaluation) and pre-builds the `formatting`
+      # derivation that the flake check below reuses from cache.
+      - name: Formatting check
+        run: nix build --print-build-logs '.#checks.x86_64-linux.formatting'
+
       # Runs every flake check: treefmt formatting, deadnix, statix, and the
       # pre-commit hooks (so a --no-verify commit can't ship unlinted).
       - name: Flake check

CLAUDE.md

@@ -0,0 +1,63 @@
+# Working on this flake
+
+Project notes for changes to this repository. Persona and memory rules live in
+the user-global config; this file is about the flake's checks and conventions.
+
+## Before you commit: run the formatter
+
+Formatting and linting are driven by the flake. CI (`.gitea/workflows/ci.yaml`)
+runs `nix flake check`, which fails the build if any file is unformatted or trips
+a lint. From the repo root:
+
+- `nix fmt` — format the whole tree (writes changes).
+- `nix flake check` — run every check read-only (what CI runs).
+- `nix develop` — dev shell; its `shellHook` installs the git pre-commit hooks so
+  the same gates run on `git commit`.
+
+Never commit with `--no-verify`. A bypassed commit ships unformatted content and
+turns CI red on the next push to `main` (see "Docs are checked too").
+
+## What gets checked
+
+Defined in `flake.nix` (the `treefmt`, `pre-commit`, and `checks` blocks) and
+`statix.toml`:
+
+| Check        | Tool                              | Covers                                                  |
+| ------------ | --------------------------------- | ------------------------------------------------------- |
+| `formatting` | treefmt → `nixfmt`                | all `*.nix`                                             |
+| `formatting` | treefmt → `shfmt`                 | shell scripts                                           |
+| `formatting` | treefmt → `prettier`              | **Markdown, YAML, JSON** (incl. `README.md`, this file) |
+| `deadnix`    | deadnix                           | dead Nix bindings (`--no-lambda-pattern-names`)         |
+| `statix`     | statix                            | Nix antipatterns (config in `statix.toml`)              |
+| pre-commit   | nixfmt-rfc-style, deadnix, statix | the same gates, run on commit                           |
+
+Excluded from formatting: `*/hardware-configuration.nix` (generated by
+`nixos-generate-config`) and `flake.lock`. Editor defaults (indent, EOL, final
+newline) are in `.editorconfig`; note Markdown keeps trailing whitespace, which
+encodes hard line breaks.
+
+## Docs are checked too
+
+prettier formats `*.md`, so **documentation edits must be run through `nix fmt`**
+exactly like code. prettier re-aligns Markdown tables in particular; hand-editing
+a table almost always leaves it non-conformant and fails the `formatting` check.
+
+The CI `formatting` step runs on **every** PR — including docs- and config-only
+changes — so a Markdown/YAML/JSON edit is format-checked before merge, not just
+after it lands on `main`. (The heavier `deadnix`/`statix`/`pre-commit` lints and
+the per-host evaluation still run only when a `.nix` file, `flake.lock`, or the
+workflow changed; see `.gitea/workflows/ci.yaml`.) Run `nix fmt` before you
+commit and the formatting check stays green.
+
+## Host evaluation
+
+CI also evaluates every `nixosConfigurations` / `darwinConfigurations` host's
+toplevel (eval only, no build) on an x86_64 runner, so eval errors fail cheaply.
+Reproduce locally:
+
+```sh
+nix eval --raw ".#nixosConfigurations.<host>.config.system.build.toplevel.drvPath"
+```
+
+Host lists are discovered from the flake, so adding or removing a host needs no
+change to the workflow.

README.md

@@ -12,16 +12,67 @@ Defined in the host table in [`flake.nix`](./flake.nix):
 | `lyrathorpe-mbp`      | `aarch64-linux`  | MacBook Pro (Apple Silicon, Asahi)                                                                          |
 | `lyrathorpe-t400`     | `x86_64-linux`   | ThinkPad T400 — [install notes](./hosts/T400/README.md)                                                     |
 | `lyrathorpe-macpro31` | `x86_64-linux`   | Mac Pro 3,1, desktop — [install notes](./hosts/MacPro31/README.md)                                          |
-| `emmathorpe-edaas`    | `x86_64-linux`   | Work WSL box (NixOS-WSL)                                                                                    |
+| `emmathorpe-edaas`    | `x86_64-linux`   | Work WSL box (NixOS-WSL) — [notes](./hosts/EDaaS/README.md)                                                 |
 | `lyrathorpe-rpi5`     | `aarch64-linux`  | Raspberry Pi 5 headless server: Docker host + nginx reverse proxy — [install notes](./hosts/RPi5/README.md) |
-| `lyrathorpe-mac`      | `aarch64-darwin` | macOS (nix-darwin)                                                                                          |
+| `lyrathorpe-mac`      | `aarch64-darwin` | macOS (nix-darwin) — [notes](./hosts/Darwin/README.md)                                                      |
 
 Shared layers: `home` (home-manager: shell, git, editor),
 `modules/common-nixos.nix` (all NixOS hosts: fonts, nix-ld, caches),
 `modules/workstation.nix` (physical graphical hosts: audio, thermald,
 earlyoom, fwupd), `modules/laptop.nix` (laptops: Wi-Fi, Bluetooth, power,
-lid), and `modules/ssh.nix` (key-only sshd). The x86 hosts also pull
+lid), `modules/desktop.nix` (wired desktops: NetworkManager), and
-`nixos-hardware` profiles.
+`modules/ssh.nix` (key-only sshd). The x86 hosts also pull `nixos-hardware`
+profiles. The full module catalogue is below.
+
+## Repository layout
+
+```
+flake.nix              # inputs, mkHost/mkDarwinHost, the host tables, dev shell + checks
+flake.lock             # pinned input revisions (Renovate keeps this fresh)
+modules/               # reusable NixOS system modules (see "Module catalogue")
+home/                  # home-manager profile: shell, git, editor, claude, desktop, sway
+users/                 # identity registry + per-user home extras (see "Users")
+hosts/<Name>/          # per-machine config: configuration.nix + hardware-configuration.nix
+lib/                   # small pure helpers (currently the Catppuccin Mocha palette)
+.gitea/workflows/      # CI (nix flake check + per-host eval)
+statix.toml            # lint config (house-style lints disabled)
+.editorconfig          # base whitespace style
+tf-inspect/            # UNRELATED scratch project (gitignored, its own git repo);
+                       #   RouterOS / home-services Terraform, not part of this flake
+```
+
+Each `nixosConfiguration` / `darwinConfiguration` is assembled in `flake.nix`
+from three layers: the shared `baseModules` (or `darwinBaseModules`), the
+per-form-factor and `nixos-hardware` modules listed in the host table, and the
+per-machine `hosts/<Name>/configuration.nix`. Home-manager is wired in as a
+system module; each user's home is composed from the `homeModules` list in that
+host's table entry.
+
+## Module catalogue
+
+Reusable NixOS modules under [`modules/`](./modules). "Imported by" says how a
+module reaches a host: **baseModules** (every NixOS host, via `flake.nix`),
+**host table** (listed explicitly per host in `flake.nix`), or **transitively**
+(pulled in by another module's `imports`).
+
+| Module             | Imported by                       | What it does / when to use it                                                                                                                                                                             |
+| ------------------ | --------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `common-nixos.nix` | baseModules (all NixOS)           | Timezone/locale, store hygiene (auto-optimise, big download buffer, **no** auto-GC), the nix-community binary cache, `nix-ld`, base CLI (`git`, `fastfetch`), and the fleet-wide font stack.              |
+| `users.nix`        | baseModules (all NixOS)           | Builds `users.users` from the registry for the host's `hostUsers`; enables zsh; enables Firefox + Thunderbird **only** when `features.swayDesktop.enable` is on. Applies per-user `linger`.               |
+| `features.nix`     | baseModules (all NixOS)           | Declares feature-flag options (currently `features.swayDesktop.enable`) so any host can read/set them without importing the heavy implementation module.                                                  |
+| `workstation.nix`  | transitively (via laptop/desktop) | Form-factor-agnostic base for physical graphical hosts: turns on `swayDesktop`, Dvorak console, PipeWire, firewall (default-deny), fstrim, earlyoom, fwupd, thermald (x86), redistributable fw.           |
+| `laptop.nix`       | host table (MBP, T400)            | `imports` workstation.nix, then adds the portable bits: iwd Wi-Fi, lid suspend/lock, Bluetooth + blueman.                                                                                                 |
+| `desktop.nix`      | host table (Mac Pro)              | `imports` workstation.nix, then swaps Wi-Fi for wired NetworkManager. Pair with `portable = false` in the host table.                                                                                     |
+| `sway.nix`         | host table (graphical hosts)      | Implementation of `features.swayDesktop`: the system Sway package, the greetd/ReGreet (cage) greeter forced to Dvorak, xdg-portal, Wayland utility packages. Home-side Sway config is in `home/sway.nix`. |
+| `ssh.nix`          | host table (T400, Mac Pro, RPi5)  | Enables sshd, opens port 22, enforces a key-only policy (no password / keyboard-interactive, no root). Authorized keys come from the registry via `users.nix`.                                            |
+| `firmware/`        | referenced by MBP host config     | Committed Apple peripheral firmware blobs for the Asahi MBP (see "MacBook (Asahi) firmware").                                                                                                             |
+
+Form-factor decision: a **laptop** imports `laptop.nix` (default
+`portable = true`); a **wired desktop** imports `desktop.nix` and sets
+`portable = false`; a **headless server** imports neither (leaves
+`features.swayDesktop.enable` at its default `false`) and adds only what it
+serves. `portable` is threaded through to `home/sway.nix`, which drops the
+battery block and brightness keys on desktops.
 
 ## Users
 
@@ -38,6 +89,16 @@ Identity is data, kept separate from the reusable modules:
   identity into that user's home config as the `identity` module arg. A host can
   therefore declare any number of users.
 
+Per-user home extras live under `users/<name>/`:
+
+- [`users/lyrathorpe/home.nix`](./users/lyrathorpe/home.nix) — personal extras
+  (an ssh host shortcut, gammastep coordinates); imported on Lyra's hosts.
+- [`users/emmathorpe/work.nix`](./users/emmathorpe/work.nix) — the work
+  toolchain (kubectl/helm/az/etc.), work-only LSP servers, and the corporate ssh
+  handling; imports
+  [`users/emmathorpe/renovate-review.nix`](./users/emmathorpe/renovate-review.nix),
+  the daily headless Renovate-PR review timer (EDaaS only).
+
 ### Portable home (off-NixOS / external consumers)
 
 The home config is also exposed for use beyond these hosts:
@@ -61,6 +122,36 @@ sudo nixos-rebuild switch --flake .#<configuration>
 darwin-rebuild switch --flake .#lyrathorpe-mac
 ```
 
+On a host whose `networking.hostName` matches its flake attribute (the WSL box
+and the Pi are set up this way), `nh os switch` resolves the configuration from
+the hostname with no `--flake`/`-H` flag.
+
+## Adding a new host
+
+1. **Create `hosts/<Name>/`.** Add `configuration.nix` with the host-specific
+   bits only: `networking.hostName`, bootloader (firmware-specific — it is
+   deliberately not set in the shared modules), and any per-machine hardware
+   quirks. Keep anything reusable in `modules/` instead.
+2. **Hardware config.** Generate `hardware-configuration.nix` on the real
+   machine with `nixos-generate-config` and commit it. If the machine does not
+   exist yet, commit a clearly-labelled placeholder so the host still evaluates
+   in CI (see the existing T400 / RPi5 placeholders), and replace it at install.
+   These files are excluded from the formatter and linters.
+3. **Add a host-table entry in `flake.nix`.** Under `hosts` (NixOS) or
+   `darwinHosts` (macOS), set `system`, the `modules` list (host config + form
+   factor + any `nixos-hardware` profiles), and the `users` map (each user's
+   `homeModules`). Choose the form factor per the decision note above; a headless
+   host imports neither `laptop.nix` nor `desktop.nix`.
+4. **Users.** If the host introduces a new person, add them to
+   `users/registry.nix` first; otherwise reference an existing username.
+5. **Verify.** `nix flake check` formats, lints, and evaluates every host —
+   including the new one — so a broken entry fails locally before CI. Then
+   `sudo nixos-rebuild switch --flake .#<configuration>` on the machine.
+
+No change to CI is needed: the host-eval step discovers hosts from the flake
+(`attrNames` of the configuration sets), so a new entry is picked up
+automatically.
+
 ## Shell environment & keybindings
 
 - Interactive shell features (zsh, tmux, git, ssh, CLI tools, auto-tmux):
@@ -111,4 +202,7 @@ A dev shell and a formatting/lint gate are wired through the flake:
 
 [`.gitea/workflows/ci.yaml`](./.gitea/workflows/ci.yaml) runs `nix flake check`
 (formatting, `deadnix`, `statix`, the pre-commit hooks) and evaluates every
-NixOS and Darwin host configuration on push/PR.
+NixOS and Darwin host configuration on push/PR. It always runs (no `paths:`
+filter) so the required check never hangs pending; the heavy Nix steps are
+skipped when a PR touches no `.nix`/lockfile/workflow file, and the job still
+reports green.

flake.lock

@@ -3,16 +3,16 @@
     "brew-src": {
       "flake": false,
       "locked": {
-        "lastModified": 1781226006,
+        "lastModified": 1783446865,
-        "narHash": "sha256-w4ZTuOnhYiDxjaynrMTASzp802QblBWmo3wpB8wVN4Y=",
+        "narHash": "sha256-nCrPEbQjgnSAOVWTxRXD9Yi6P3oECdtZISYcQCFI9Fs=",
         "owner": "Homebrew",
         "repo": "brew",
-        "rev": "109191be4988470b51a60a5ef1998520aa24c01b",
+        "rev": "655769712a9a9499563d9685a8488f349354492d",
         "type": "github"
       },
       "original": {
         "owner": "Homebrew",
-        "ref": "6.0.1",
+        "ref": "6.0.9",
         "repo": "brew",
         "type": "github"
       }
@@ -25,11 +25,11 @@
       },
       "locked": {
         "dir": "pkgs/firefox-addons",
-        "lastModified": 1782014564,
+        "lastModified": 1783828963,
-        "narHash": "sha256-F/royQHyJAyKWKrV8AaG4Yf1yjzxa+PFk5xvTdvBrzk=",
+        "narHash": "sha256-eTytzcUJCaDUZ3/9EF0+V3fvlikQMQBwiX1Sx4Gy+No=",
         "owner": "rycee",
         "repo": "nur-expressions",
-        "rev": "d6668e34bbce788459883a1097bf0ee170f49c61",
+        "rev": "8d61e9afde605cd6c22dab68b83d7a71f0a6c5b2",
         "type": "gitlab"
       },
       "original": {
@@ -93,11 +93,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1778716662,
+        "lastModified": 1782949081,
-        "narHash": "sha256-m1Yf0wZ8j1OHjTc2UwHwyQRSnNeSgLJOd7q5Y45hzi4=",
+        "narHash": "sha256-vp6Y/Grm98ESt6ceOkWiHWyZRDV3J1RID4w+6NWK9yA=",
         "owner": "hercules-ci",
         "repo": "flake-parts",
-        "rev": "f7c1a2d347e4c52d5fb8d10cb4d94b5884e546fb",
+        "rev": "17c9d6cdfc60c64f4ee8d306f9bc0b4ccb51481e",
         "type": "github"
       },
       "original": {
@@ -130,17 +130,16 @@
     "git-hooks": {
       "inputs": {
         "flake-compat": "flake-compat",
-        "gitignore": "gitignore",
         "nixpkgs": [
           "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1781733627,
+        "lastModified": 1783008725,
-        "narHash": "sha256-U3yTuGBnmXvXoQI3qkpfEDsn9RovQPAjN7ndRco+3u0=",
+        "narHash": "sha256-jGiy6+sxjNWXSjp25uoJuNfyH9zBK1PEDY0lVoL4ibQ=",
         "owner": "cachix",
         "repo": "git-hooks.nix",
-        "rev": "3bbec39bc90eadfa031e6f3b77272f3f60803e39",
+        "rev": "bca82caa46d5ec0f5d422c61fb1e30bc51313cbe",
         "type": "github"
       },
       "original": {
@@ -149,27 +148,6 @@
         "type": "github"
       }
     },
-    "gitignore": {
-      "inputs": {
-        "nixpkgs": [
-          "git-hooks",
-          "nixpkgs"
-        ]
-      },
-      "locked": {
-        "lastModified": 1709087332,
-        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
-        "owner": "hercules-ci",
-        "repo": "gitignore.nix",
-        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
-        "type": "github"
-      },
-      "original": {
-        "owner": "hercules-ci",
-        "repo": "gitignore.nix",
-        "type": "github"
-      }
-    },
     "home-manager": {
       "inputs": {
         "nixpkgs": [
@@ -177,11 +155,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1781981105,
+        "lastModified": 1783740085,
-        "narHash": "sha256-/1nNBbA7PrSQpTc9Qazkhl4kIPg+TNl0CjxS3UQJKlw=",
+        "narHash": "sha256-qajyHfZY29G2oEQk+uHxmsJcRoBUBXP9maTpFlwP/dI=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "7bfff44b465909f69a442701293bc0badcf476dc",
+        "rev": "3cd22efe6471dc7365c822bd9ad73a21e55f38fb",
         "type": "github"
       },
       "original": {
@@ -214,11 +192,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1781772065,
+        "lastModified": 1783744694,
-        "narHash": "sha256-xIbRSwDB1GBAUsWsQZUjudGfAGQt3BOpsWaO/ugVa4w=",
+        "narHash": "sha256-2cp6N3rrwnGYLTx9l6N+NI+kwrCWxvJUbj5WJhvB29A=",
         "owner": "nix-darwin",
         "repo": "nix-darwin",
-        "rev": "adda04f0bf4819575b1978c2f8d78401b3c2be12",
+        "rev": "c3e90c89649b07d1a96e4b9dd6cd0d6e44b91a74",
         "type": "github"
       },
       "original": {
@@ -233,11 +211,11 @@
         "brew-src": "brew-src"
       },
       "locked": {
-        "lastModified": 1781389246,
+        "lastModified": 1783875858,
-        "narHash": "sha256-ORqLAo/hoJdsZC7UPAuEHev6S0+XIqKEC7vjo5prz1k=",
+        "narHash": "sha256-+yYNOkj/bkVQmwKH0hewqwBwAEoh4Gq2BmQPIP1jNrg=",
         "owner": "zhaofengli",
         "repo": "nix-homebrew",
-        "rev": "de7953a08ed4bb9245be043e468561c17b89130d",
+        "rev": "60641da8324e6a1af716a0340d901ccb131c91ef",
         "type": "github"
       },
       "original": {
@@ -253,11 +231,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1782030356,
+        "lastModified": 1783864904,
-        "narHash": "sha256-h4WpMr455AfRub0FXBaon6Vcpe0waUyJ4GivIW6oyd4=",
+        "narHash": "sha256-BQxN5UMg9FOevAsgBRwPxfxlh51Puj+dNn/8Dsi3sPM=",
         "owner": "nix-community",
         "repo": "nix-index-database",
-        "rev": "3017088b49efd404f78e3b104f553b97e4af786b",
+        "rev": "1111b9bc836afb7e31a7014e8d1272de9b1c917d",
         "type": "github"
       },
       "original": {
@@ -274,11 +252,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1781520503,
+        "lastModified": 1783669315,
-        "narHash": "sha256-XuqQQG1qRyc3o8ld937sDLQNx+QrGV852KJ0dNglJDg=",
+        "narHash": "sha256-DjIkyK48jWUxYCCoTDS9L5PgGg6/RFRSRXW2dSFpJg8=",
         "owner": "nix-community",
         "repo": "nixos-apple-silicon",
-        "rev": "43043ad207529650f9fa68e1705f7cf9c08bfdeb",
+        "rev": "9e46a0edd8a6d96538d146a4bb4477e7fae8b1a0",
         "type": "github"
       },
       "original": {
@@ -294,11 +272,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1781622756,
+        "lastModified": 1783792734,
-        "narHash": "sha256-JrPh4M6S7aPsEE9tOENuZrxC6o2szSLlK+t4+nLke9s=",
+        "narHash": "sha256-50rvY9GdFvpYDcMLcD/4cWSi0hVxArT5wsGlVsHy8eY=",
         "owner": "NixOS",
         "repo": "nixos-hardware",
-        "rev": "08018c72174a4df5657f8d94178ac69fb9c243e5",
+        "rev": "8efb4337e857949f4cfac86d12ef1066f417f31f",
         "type": "github"
       },
       "original": {
@@ -315,11 +293,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1781182279,
+        "lastModified": 1783897948,
-        "narHash": "sha256-V5EQQbDnmdiXGQXrEF1PEL7QYsFqfH8N1E89Z5ONwFk=",
+        "narHash": "sha256-wusXpttNJn7SvUMvGLpNuJgcwIIkMwlWNnasPPxpftg=",
         "owner": "nix-community",
         "repo": "NixOS-WSL",
-        "rev": "5675822ba756e6e56f8f6a5a76e90e0da2ece94d",
+        "rev": "7348d3f38ab1bd6abe156a923fab6f43656b168f",
         "type": "github"
       },
       "original": {
@@ -330,11 +308,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1781216227,
+        "lastModified": 1783703440,
-        "narHash": "sha256-9mUW6gNwoN2SWc/l0fW4svPNOulXLl8ijqKyeSOGgJE=",
+        "narHash": "sha256-O3/YajjWo001VUIgD8BwaRdSNLUFe7nZ1qV5TwhRBcw=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "a0374025a863d007d98e3297f6aa46cc3141c2f0",
+        "rev": "8f0500b9660505dc3cb647775fe9a978a74b5283",
         "type": "github"
       },
       "original": {
@@ -346,11 +324,11 @@
     },
     "nixpkgs-unstable": {
       "locked": {
-        "lastModified": 1781577229,
+        "lastModified": 1783776592,
-        "narHash": "sha256-lrp67w8AulE9Ks53n27I45ADSzbOCn4H+CNW1Ck8B+8=",
+        "narHash": "sha256-UgCQzxeWI75XM8G+hPrPh+MKzEPjG3SpAj7dtqSbksA=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "567a49d1913ce81ac6e9582e3553dd90a955875f",
+        "rev": "e7a3ca8092b61ff85b6a45bf863ea2b2d6a661b3",
         "type": "github"
       },
       "original": {
@@ -369,11 +347,11 @@
         "systems": "systems"
       },
       "locked": {
-        "lastModified": 1781971008,
+        "lastModified": 1782919967,
-        "narHash": "sha256-T2u2RQZWKvD1J+TgcxjiJr8IymBr/PrUNeAGhMZFZU4=",
+        "narHash": "sha256-pRwjfB5HQJ3m8J8bOR43pPHtHI7VUJSqwLA3P06cOY0=",
         "owner": "nix-community",
         "repo": "nixvim",
-        "rev": "7afca458f064f166d3a9c98db3b41a984fe46492",
+        "rev": "667c8471f4a0fb24d702d1a61af8609f1a5f1ba6",
         "type": "github"
       },
       "original": {

home/claude/memory/MEMORY.md

@@ -1,11 +1,14 @@
 - [User name](user_name.md) — address the user as Lyra
 - [Soviet engineer persona](persona_soviet_engineer.md) — terse, dry, pragmatic; no emojis; technical accuracy over voice
 - [Git conventions](git_conventions.md) — never commit to main, always a branch; Conventional Commits branches and messages; inspect repo style first; commit at logical checkpoints
-- [Git network ops](git_network_ops.md) — GitHub pushable in-sandbox (agent key; just sandbox off); Gitea code.emmathe.dev needs hand-off
+- [Git network ops](git_network_ops.md) — GitHub and Gitea (code.emmathe.dev) both pushable in-sandbox (sandbox off, agent key); raise Gitea PRs via tea CLI
-- [Git commit signing](git_commit_signing.md) — signs in-sandbox via ssh-agent (allowAllUnixSockets + inlined pubkey)
+- [Git commit signing](git_commit_signing.md) — signs in-sandbox via ssh-agent (allowAllUnixSockets + inlined pubkey); sig=N without allowedSignersFile is cosmetic, still signed
 - [Git check state first](git_check_state.md) — always check branch/status/divergence before git work; Lyra edits repos between sessions
 - [Keep docs updated](docs_keep_updated.md) — update docs in the same pass as code/config changes; stale docs are a defect
+- [SIBO Workabout MX project](sibo_workabout_mx_scanner.md) — RE + barcode-inventory project state; scanner is an OO DYL object (oscanner), blocked on on-device ordinal capture; resume via code/inventory/CONTINUATION.md
 - [Jira tooling](jira_tooling.md) — comments are Markdown not wiki; transitions may need assignee; link direction; WSP transition IDs
+- [Jira WSP fields](jira_wsp_fields.md) — WSP field map: issue-type IDs, required Bug fields with allowed values/IDs, Task shortcut, relevant components
 - [Review and comments workflow](workflow_review_and_comments.md) — show PR body and non-trivial Jira comments before posting; terse IaC code comments; PR body content rules
 - [Sandbox prompts](feedback_sandbox_prompts.md) — don't prompt for sandbox-disable or routine read-only shell ops; broaden permissions instead
 - [Dev clusters disposable](dev_clusters_disposable.md) — Lyra's dev clusters are recreatable; mutate/break freely, no confirmation needed
+- [Nix shell tooling](nix_shell_tooling.md) — any nixpkgs tool runs ad hoc via `nix run`/`nix shell nixpkgs#<pkg>`; a missing command is never a dead end

home/claude/memory/git_commit_signing.md

@@ -1,6 +1,6 @@
 ---
 name: git-commit-signing
-description: "Commits sign in-sandbox via ssh-agent — needs `allowAllUnixSockets: true` in settings, plus pubkey inlined in user.signingkey."
+description: "Commits sign in-sandbox via ssh-agent (allowAllUnixSockets + inlined pubkey); local verify shows sig=N without an allowedSignersFile but the commit IS signed."
 metadata:
   node_type: memory
   type: feedback
@@ -19,4 +19,6 @@ Lyra's git is configured to SSH-sign commits (`commit.gpgsign=true`, `gpg.format
 
 **How to apply:** Commit normally with `git commit`. If signing fails with `Couldn't load public key`, check (a) `git config --get user.signingkey` starts with `key::ssh-ed25519 AAAA...` (not literal `$(...)`), (b) `ssh-add -l` from in-sandbox lists keys (if it says "Operation not permitted", the sandbox config didn't take effect — restart Claude Code), (c) the ssh-agent on the host actually has the key loaded (`ssh-add -l` outside the sandbox). Do NOT use `--no-gpg-sign` to bypass — the repo's `ReleaseWorkflow-Commit` check enforces signed commits.
 
+**Verifying — the recurring trap:** `git log --show-signature` and the `%G?` format both report `N` and print `error: gpg.ssh.allowedSignersFile needs to be configured and exist for ssh signature verification`. This does NOT mean the commit is unsigned — it means git has no local allowed-signers file to check it against. The signature is present. Confirm the real state with `git cat-file commit <ref> | grep -i '^gpgsig'`: an `-----BEGIN SSH SIGNATURE-----` block means signed. So `N` here is cosmetic, not a signing failure — do not "fix" it by re-committing. To make local verification actually pass, set `gpg.ssh.allowedSignersFile` to a file mapping the signer to the pubkey (a line like `emma.thorpe@cloud.com ssh-ed25519 AAAA...`); Gitea/CI verifies server-side regardless.
+
 Related: [[git-network-ops]], [[git-conventions]].

home/claude/memory/git_network_ops.md

@@ -1,6 +1,6 @@
 ---
 name: git-network-ops
-description: Push/pull is remote-specific — GitHub is agent-pushable in-sandbox; Gitea (code.emmathe.dev) needs hand-off to Lyra.
+description: Push/pull is remote-specific — both GitHub and Gitea (code.emmathe.dev) are agent-pushable in-sandbox (sandbox off); raise Gitea PRs with the tea CLI.
 metadata:
   node_type: memory
   type: feedback
@@ -11,8 +11,8 @@ Whether a network op can run depends on which key the remote needs:
 
 **GitHub remotes (e.g. csg-citrix-storefront/\*): pushable in-sandbox by the agent.** ssh-agent holds the decrypted `~/.ssh/id_ed25519` (`emma.thorpe@cloud.com`), which is authorized on GitHub. Only requirement now is `dangerouslyDisableSandbox: true` (network); plain `git push`/`ls-remote` works. Probe non-mutatively with `git ls-remote` first. (Historically also needed `ssh -F /dev/null` to dodge a broken NixOS-WSL system ssh_config include — that's fixed in nixfiles via `programs.ssh.systemd-ssh-proxy.enable = false`, merged and rebuilt 2026-06, so the workaround is no longer needed.)
 
-**Gitea (`code.emmathe.dev`, e.g. nixfiles): hand off to Lyra.** Needs `~/.ssh/code.emmathe.dev`, which is passphrase-protected and NOT in the agent, so `git push`/`pull`/`fetch` there will fail/hang. Pause, give Lyra the exact command (she runs `ssh-add ~/.ssh/code.emmathe.dev` once, then pushes).
+**Gitea (`code.emmathe.dev`, e.g. nixfiles): pushable in-sandbox by the agent (as of 2026-07-14).** The ssh-agent now holds the `code.emmathe.dev` key (`git@code.emmathe.dev`), so `git push` works with `dangerouslyDisableSandbox: true` — it needs the agent socket plus `~/.ssh/known_hosts`, both reachable with sandbox off. Probe with `git ls-remote` first. Raise PRs with the `tea` CLI, which is installed and logged in to `code.emmathe.dev` (user `lyrathorpe`): `tea pr create --login code.emmathe.dev --repo lyrathorpe/nixfiles --base main --head <branch> --title "..." --description "..."`. Only fall back to hand-off if `ssh-add -l` (sandbox off) does NOT list the `code.emmathe.dev` key — then it dropped from the agent and Lyra must re-add it (`ssh-add ~/.ssh/code.emmathe.dev`, passphrase-protected).
 
 **Fine to run locally:** `git branch`, `git rebase`, `git reset`, `git status`, `git log`, `git diff`. `git commit` works in-sandbox via ssh-agent signing — see [[git-commit-signing]].
 
-**How to apply:** Check the remote host before a network op. GitHub → just do it (sandbox off). Gitea → hand off. Related: [[git-conventions]].
+**How to apply:** Both remotes → do it with sandbox off; probe with `git ls-remote` first, and raise Gitea PRs via `tea`. Hand off only if the Gitea key is missing from the agent. Related: [[git-conventions]].

home/claude/memory/jira_wsp_fields.md

@@ -0,0 +1,32 @@
+---
+name: jira-wsp-fields
+description: WSP Jira project field map — issue-type IDs, required Bug fields with allowed values/IDs, and the Task shortcut for fast ticket creation
+metadata:
+  type: reference
+---
+
+Field map for the **WSP (Workspace Platform)** Jira project, to create tickets without trial-and-error. Site `citrix.atlassian.net`, cloudId `70cbc59a-06d2-4508-a9a6-61f1dbc2057f`, project key `WSP`, project id `10061`. See also [[jira-tooling]].
+
+**Issue-type IDs:** Epic `10000`, Story `10004`, Task `10008`, Bug `10123`, Sub-task `10009`.
+
+**Fast path — use Task, not Bug.** A `Task` requires only `summary` (project/issuetype auto, reporter defaults to caller). A `Bug` requires six extra fields (below), so only pick Bug when it must be a Bug. The sibling infra/remediation tickets in WSP are Tasks.
+
+**Bug required fields** (enforced by the create validator; note `createmeta` omits `versions` but the API rejects without it):
+
+| Field               | Key                 | Shape                                  | Allowed values (value = id)                                                                                       |
+| ------------------- | ------------------- | -------------------------------------- | ----------------------------------------------------------------------------------------------------------------- |
+| Severity            | `customfield_10061` | `{"value":"S2"}`                       | S1=10643, S2=10644, S3=10645, S4=10646                                                                            |
+| Affects Environment | `customfield_10116` | `{"value":"Production"}`               | Production=11031, Staging=11032, Integration=11033, Development=11034, Test=11035                                 |
+| Defect Source       | `customfield_10138` | `{"value":"Internal - Manual"}`        | Internal - Manual=12699, Internal - Automation=12700, Customer=12702, Security Review=12704                       |
+| Regression          | `customfield_10141` | `{"value":"No"}`                       | Yes - Previous Build=12705, Yes - Previous Release=12706, No=12707                                                |
+| Components          | `components`        | `[{"name":"Workspace Configuration"}]` | 109 options; relevant ones below                                                                                  |
+| Affects versions    | `versions`          | `[{"name":"<version>"}]`               | not in requiredFieldsOnly createmeta — fetch current list from full createmeta or project versions before setting |
+
+Select customfields (`...customfieldtypes:select`) accept `{"value":"..."}` or `{"id":"..."}`. Components/versions accept `[{"name":...}]` or `[{"id":...}]`.
+
+**Relevant Components (name=id):** Workspace Configuration=12052, Workspace-Platform=12060, Multicluster Platform=12023, WSP Core Ingress=12037, Microservice Infrastructure=12020, Infrastructure=34375, Custom Domain Proxy=12021, Custom Domain Ingress Manager=11968, Custom Domain Infrastructure=11975, StoreFrontConfiguration=12042, StoreFront=12050, Test Infrastructure=12012, WSP Release Infrastructure=12011.
+
+**Other create notes:** pass `description`/`commentBody` with `contentFormat: markdown`; set labels via `additional_fields {"labels":[...]}`; attach to an epic with the top-level `parent` param (`parent: "WSP-32494"` works for epic→Task). WSP transition IDs live in [[jira-tooling]].
+
+Example Bug `additional_fields`:
+`{"customfield_10061":{"value":"S2"},"customfield_10116":{"value":"Production"},"customfield_10138":{"value":"Internal - Manual"},"customfield_10141":{"value":"No"},"components":[{"name":"Workspace Configuration"}],"versions":[{"name":"<version>"}],"labels":["..."]}`

home/claude/memory/nix_shell_tooling.md

@@ -0,0 +1,23 @@
+---
+name: nix-shell-tooling
+description: "Any nixpkgs tool can be run ad hoc via nix run / nix shell — a missing command is never a dead end during development"
+metadata:
+  node_type: memory
+  type: feedback
+  originSessionId: dfb56b58-518b-4daf-b531-7119bb4a9534
+---
+
+Any tool in nixpkgs can be run without installing it into the environment. If a
+command is missing during development, pull it from nixpkgs on the fly instead
+of working around its absence or reporting the tool as unavailable.
+
+**Why:** Lyra runs NixOS; the ambient PATH is deliberately minimal, but the full
+nixpkgs set is always one command away. "command not found" is not a blocker.
+
+**How to apply:**
+
+- One-off run: `nix run nixpkgs#<pkg> -- <args>` (e.g. `nix run nixpkgs#jq -- .`).
+- Tools on PATH for a session: `nix shell nixpkgs#<pkg> [nixpkgs#<pkg2> ...]`,
+  then run commands normally.
+- Legacy form also works: `nix-shell -p <pkg> --run '<cmd>'`.
+- Prefer this over hand-rolling a substitute for a tool that exists in nixpkgs.

home/claude/memory/sibo_workabout_mx_scanner.md

@@ -0,0 +1,25 @@
+---
+name: sibo-workabout-mx-scanner
+description: State of the Psion Workabout MX reverse-engineering / barcode-inventory project and how to resume it
+metadata:
+  node_type: memory
+  type: project
+  originSessionId: 74de014e-9cf4-47f6-92f4-c34197ac1858
+---
+
+Long-running project (July 2026) reverse-engineering the **Psion Workabout MX** (SIBO OS, NEC V30MX, TopSpeed C) to build a barcode **inventory demo** (scan UPC → DBF database file; add stock, consume by a quantity unit) and, alongside, **complete device programming documentation**. Repo: Gitea **lyrathorpe/sibo-playground**, working branch **`feat/inventory-phase1-scan`** (unmerged). Gitea needs hand-off / the contents API for pushes — see [[git-network-ops]]; [[git-conventions]] for branch/PR rules.
+
+**Committed on the branch (durable, survive reboot):**
+
+- `docs/reference/00-08` + index — the SIBO/MX programming reference (building apps, system/OS, I/O devices, PLIB core, file system & DBF, UI, hardware, and RE'd boot/OS-call internals).
+- `code/inventory/` — app scaffold: `upc.c/.h` (UPC-A check-digit validation, correct), `bcode.c/.h`, `scan.c` (Phase-1 diagnostics), `README.md`, **`SCANNER-API.md`** (all scanner findings), **`CONTINUATION.md`** (the on-device debugging procedure to finish).
+- `docs/mx-re/toolchain-and-plan.md` — the RE toolchain.
+- The **ROM `w2mx_v7.20f_eng.bin`** and the full **SDK + HDK** (manuals as `docs/*.txt`; headers/libs/`bar*.ldd` under `code/SIBOSDK/`; HDK under `code/HDK/`) are on the branch. `/tmp/claude/sibo/` working files (ROM slices, MAME rom dir, Ghidra/decomp output) are transient and reproducible from the toolchain doc.
+
+**Scanner — key result:** the integral laser is driven as an **OO library object** in `SCANNER.DYL` (category token **`oscanner`**) via `p_getlibh` → `p_newsend`/`f_newsend` → `p_send`, over **LIBMANAGER (INT 0x84)** / **MESSMANAGER (INT 0x83)** — NOT raw device I/O. Confirmed on the physical device: `p_open("WL2:D")` + control ops **6** then **7** (`p_iow(chan,6); p_iow(chan,7)`) fire the laser to a good decode (green LED). Default Symbol2 11-byte param block: `04 3f 01 15 06 04 1e 80 0d 0a 06` (decoded output is CR/LF-terminated). Dead ends (do not retry): raw `TTY:D` reads, and the wand `BAR:` / `bar*.ldd` decoders (probe expansion slots → `-41`).
+
+**Blocked on / next step:** the OO **message ordinals + parameter structs** for init / set-params / trigger / read. OLIB assigns ordinals dynamically across the class hierarchy (base classes in `olib`/`hwim`), so they resolve only at runtime — capture them with the **SIBO Debugger on the physical device** (remote debug over serial; it supports breakpoints inside DYLs). MAME cannot inject a barcode, so the last mile must be on hardware. Full step-by-step is in `code/inventory/CONTINUATION.md`.
+
+**RE toolchain (reproducible):** the ROM is MAME machine **`psionwamx`**; run its debugger headless via `xvfb-run -a mame psionwamx -rompath roms -debug -debugscript CMDS -sound none -seconds_to_run N` (MAME lua input injection into the keyboard matrix does NOT work headless — a known limitation). Static: **radare2** (16-bit x86). Decompile: **Ghidra headless** (processor `x86:LE:16:Real Mode`, a Java GhidraScript — Ghidra 12 has no bundled Python). Get MAME/radare2/Ghidra via `nix-shell -p ...`. Details in `docs/mx-re/toolchain-and-plan.md`.
+
+**Fallback to deliver value now:** Phase 2 (the DBF inventory: add stock, consume by quantity) can be built with keyboard UPC entry against `docs/reference/05-filesystem-dbf.md`, dropping the scanner in behind the same interface once retrieval is finished. [[docs-keep-updated]]

hosts/Darwin/README.md

@@ -0,0 +1,51 @@
+# macOS (nix-darwin) — `lyrathorpe-mac`
+
+Flake host: `lyrathorpe-mac` (`aarch64-darwin`). Apple Silicon Mac managed by
+**nix-darwin** from this same flake. Built via `mkDarwinHost` (single-user —
+macOS owns the account; identity still comes from the registry). Files:
+`configuration.nix`.
+
+## What this host is
+
+A macOS workstation. The interactive user environment (shell, git, editor,
+Claude) is the **shared `../../home` bundle** — the same modules the Linux hosts
+use — so the terminal experience matches. The Linux-only `desktop.nix`/`sway.nix`
+are intentionally left out. This host config covers the macOS-specific layer:
+system packages, Homebrew, and macOS UI defaults.
+
+## Package sourcing
+
+- **nixpkgs** (`environment.systemPackages`) for CLI tooling and libraries.
+- **Homebrew**, owned declaratively by `nix-homebrew` (Rosetta enabled for
+  x86_64 formulae). The `brews`/`casks` lists are **authoritative**:
+  `onActivation.cleanup = "zap"` uninstalls anything not declared. GUI apps are
+  casks (nixpkgs darwin GUI support is unreliable); a few version-pinned
+  toolchains and the PWA host stay on brew for continuity.
+- **Mac App Store** apps are **not** declarative: nix-darwin 26.05 runs
+  activation as root, and `mas` cannot reach the App Store session from root.
+  Install them by hand with `mas install <id>` from a GUI Terminal (the `mas`
+  CLI is in `environment.systemPackages`).
+
+## macOS integration
+
+- `security.pam.services.sudo_local` — **Touch ID for sudo** (and
+  `darwin-rebuild`'s sudo prompt), kept in `sudo_local` so it survives OS
+  updates. `reattach` pulls in `pam_reattach` so Touch ID works inside tmux
+  (which the terminals auto-start).
+- `system.defaults` — declarative dock / finder / global / trackpad preferences,
+  applied on activation and reversible. This is the main reason to run nix-darwin
+  beyond package management.
+- The JetBrainsMono Nerd Font is installed to `/Library/Fonts`; set it in
+  iTerm2 (Settings → Profiles → Text → Font) so the tmux statusline glyphs
+  render.
+
+## stateVersion
+
+`system.stateVersion = 5` (the nix-darwin state version, an integer — not a
+NixOS release string). Read `darwin-rebuild changelog` before changing it.
+
+## Apply
+
+```sh
+darwin-rebuild switch --flake .#lyrathorpe-mac
+```

hosts/EDaaS/README.md

@@ -0,0 +1,53 @@
+# Work WSL box — `emmathorpe-edaas`
+
+Flake host: `emmathorpe-edaas` (`x86_64-linux`). NixOS running under
+**NixOS-WSL** on the corporate Windows machine. Headless: no Sway desktop
+(`features.swayDesktop.enable = false`), plain WSL shell login. Files:
+`configuration.nix`.
+
+## What this host is
+
+The day-to-day work environment. It layers the corporate Kubernetes / Helm /
+Terraform / cloud toolchain and a couple of work-only editor language servers on
+top of the shared home profile. The system config here is thin — it is mostly
+WSL plumbing; the user-facing tooling lives in
+[`../../users/emmathorpe/work.nix`](../../users/emmathorpe/work.nix).
+
+## WSL specifics
+
+- `wsl.enable`, default user `emmathorpe`, Windows PATH interop and start-menu
+  launchers on. `/etc/hosts` generation is off (`generateHosts = false`).
+- **Docker Desktop integration**, not the native daemon as the primary path:
+  `wsl.extraBin` shims the coreutils/`groupadd`/`usermod` binaries Docker
+  Desktop's `wsl-distro-proxy` expects, and `docker-desktop-proxy.script` is
+  patched to the real proxy path. The native `virtualisation.docker` is also
+  enabled (with `enableOnBoot` + `autoPrune`).
+- `programs.ssh.systemd-ssh-proxy.enable = false` — the NixOS-WSL store is a
+  read-only VHD owned by `nobody`, and OpenSSH rejects the generated
+  `ssh-proxy` Include as "Bad owner or permissions", which would break ssh/git
+  for every command. The vsock proxy it provides is unused under WSL.
+- `networking.hostName = "emmathorpe-edaas"` matches the flake attribute so
+  `nh os switch` resolves without `-H`.
+
+## Renovate review timer
+
+The host-table entry sets `users.emmathorpe.linger = true` so the user's
+`systemd --user` instance stays alive without an open login session. That keeps
+the daily headless **Renovate PR review** timer firing — defined in
+[`../../users/emmathorpe/renovate-review.nix`](../../users/emmathorpe/renovate-review.nix)
+(imported only from `work.nix`, so it exists on this machine alone). See that
+file's header for the auth (Vertex AI ADC), triage policy, and caveats.
+
+## stateVersion
+
+`system.stateVersion = "24.11"` — the release this box was first installed on.
+Leave it; it freezes stateful defaults and is not meant to track the current
+nixpkgs.
+
+## Apply
+
+```sh
+sudo nixos-rebuild switch --flake .#emmathorpe-edaas
+# or, since the hostname matches the attribute:
+nh os switch
+```

hosts/MBP-Asahi/configuration.nix

@@ -27,6 +27,10 @@
     ];
   };
 
+  # Explicit rather than relying on the module default (which upstream will stop
+  # defaulting to true; the eval warns otherwise).
+  hardware.asahi.enable = true;
+
   # Apple peripheral firmware (Wi-Fi/Bluetooth). The directory is gitignored and
   # populated out-of-band -- see README.
   hardware.asahi.peripheralFirmwareDirectory = ../../modules/firmware;

hosts/MacPro31/README.md

@@ -48,7 +48,7 @@ gigabit ports.
 ## Login
 
 Graphical login via a Wayland greeter — `greetd` running ReGreet inside the
-`cage` kiosk compositor — configured centrally in `lyrathorpe/swaywm.nix` for
+`cage` kiosk compositor — configured centrally in `../../modules/sway.nix` for
 every Sway host (gated on `features.swayDesktop.enable`). The greeter is forced
 to the Dvorak layout to match the console and Sway session. Set the user
 password (`passwd lyrathorpe`) after install, or the greeter cannot

hosts/RPi5/README.md

@@ -15,7 +15,7 @@ Headless `aarch64-linux` server with two roles:
    ```sh
    nixos-generate-config --root /mnt
    # copy /mnt/etc/nixos/hardware-configuration.nix over
-   # system/machine/RPi5/hardware-configuration.nix in this repo, then commit
+   # hosts/RPi5/hardware-configuration.nix in this repo, then commit
    ```
    `hardware-configuration.nix` in this directory is a **placeholder** committed
    only so the host evaluates in CI. The machine will not boot correctly until it
@@ -28,7 +28,8 @@ Headless `aarch64-linux` server with two roles:
    nh os switch
    ```
 4. Give the login user a password (`passwd lyrathorpe`) and confirm the key in
-   `system/modules/ssh.nix` is the one you will connect with.
+   the user registry (`../../users/registry.nix`, applied by
+   `../../modules/ssh.nix`) is the one you will connect with.
 
 ## Docker socket (security)
 

hosts/T400/README.md

@@ -35,7 +35,7 @@ change and `radeon` stays idle.
 ## Login
 
 Graphical login via a Wayland greeter — `greetd` running ReGreet inside the
-`cage` kiosk compositor — configured centrally in `lyrathorpe/swaywm.nix` for
+`cage` kiosk compositor — configured centrally in `../../modules/sway.nix` for
 every Sway host (gated on `features.swayDesktop.enable`). The greeter is forced
 to the Dvorak layout to match the console and Sway session. Set the user
 password (`passwd lyrathorpe`) after install, or the greeter cannot

users/emmathorpe/work.nix

@@ -51,6 +51,17 @@
   home.shellAliases = {
     docker = "/run/current-system/sw/bin/docker";
   };
+
+  # Source the (nix-unmanaged) Jenkins credentials file into every zsh, so the
+  # JENKINS_UCE_/JENKINS_STF_ tokens are exported for all shells and anything they
+  # launch -- the Jenkins MCP servers read them via ${JENKINS_*} expansion.
+  # envExtra lands in ~/.zshenv, which zsh sources for login, interactive, and
+  # non-interactive shells alike. Guarded so a missing file never breaks a shell;
+  # the file holds secrets, so it is kept out of the world-readable nix store.
+  programs.zsh.envExtra = ''
+    [ -f "$HOME/.jenkinsenv" ] && . "$HOME/.jenkinsenv"
+    [ -f "$HOME/.splunkenv" ] && . "$HOME/.splunkenv"
+  '';
   programs.tmux = {
     # kube context/namespace in the status line. kube-tmux is pinned as a flake
     # input (it is not in nixpkgs), so the script is always present in the store.