Emma Thorpe
b3fa34f431
Split the T400 bootloader into self-contained, importable modules so the host
can match whatever firmware is flashed (switch by changing one import):
- boot-bios.nix stock BIOS / coreboot+SeaBIOS -> GRUB on the MBR (default)
- boot-coreboot-grub.nix coreboot GRUB payload -> config-only GRUB (device=nodev)
- boot-coreboot-uefi.nix coreboot Tianocore/UEFI payload -> systemd-boot; carries
its own ESP (/boot vfat) so it travels with the mode
Cover the optional discrete ATI Mobility Radeon HD 3470 (RV620): load the open
`radeon` KMS driver in the initrd for early modesetting (firmware via
enableRedistributableFirmware), with a note on the T400's switchable graphics.
All three boot variants evaluate; nixfmt clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
12 lines
360 B
Nix
12 lines
360 B
Nix
# Boot via legacy BIOS -- the stock Lenovo BIOS, or coreboot with the SeaBIOS
|
|
# payload (both present a legacy BIOS interface). GRUB is installed to the MBR of
|
|
# the boot disk. This is the default.
|
|
{ ... }:
|
|
{
|
|
boot.loader.grub = {
|
|
enable = true;
|
|
# Must point at the actual install disk -- adjust if it is not /dev/sda.
|
|
device = "/dev/sda";
|
|
};
|
|
}
|