Emma Thorpe
2fc39a5f15
Committed so the lyrathorpe-rpi5 host evaluates in CI before the Pi is provisioned. It is a placeholder, not a bootable config: on first install, regenerate it on the device with nixos-generate-config and replace this file. Excluded from formatters/linters by the existing hardware-configuration.nix rules.
32 lines
1.1 KiB
Nix
32 lines
1.1 KiB
Nix
# PLACEHOLDER hardware configuration for the Raspberry Pi 5.
|
|
#
|
|
# This file is NOT the real generated config -- it exists only so the host
|
|
# evaluates in CI before the Pi is provisioned. The machine will not boot from
|
|
# it as-is. On first install, regenerate this file on the device with
|
|
# nixos-generate-config --root /mnt
|
|
# and replace this placeholder with the output (commit it). See ./README.md.
|
|
#
|
|
# Like every hardware-configuration.nix in this repo, this file is excluded from
|
|
# the formatter and linters (see the pre-commit/treefmt excludes in flake.nix).
|
|
{ modulesPath, ... }:
|
|
{
|
|
imports = [ (modulesPath + "/installer/scan/not-detected.nix") ];
|
|
|
|
nixpkgs.hostPlatform = "aarch64-linux";
|
|
|
|
# The Raspberry Pi 5 boots from an SD card / USB with a FAT firmware partition
|
|
# and an ext4 root. Labels match the conventional sd-image layout; the real
|
|
# generated config will use by-uuid device paths instead.
|
|
fileSystems."/" = {
|
|
device = "/dev/disk/by-label/NIXOS_SD";
|
|
fsType = "ext4";
|
|
};
|
|
|
|
fileSystems."/boot/firmware" = {
|
|
device = "/dev/disk/by-label/FIRMWARE";
|
|
fsType = "vfat";
|
|
};
|
|
|
|
swapDevices = [ ];
|
|
}
|