Emma ThorpeandClaude Opus 5
fd97b694ad
CI / flake (push) Skipped
CI / flake (pull_request) Failing after 3m37s
A headless aarch64 companion for a Psion 5MX: PPP over RS232 with NAT out to wifi and a telnet login, plus a cleartext POP3/SMTP proxy for the Psion's mail client. - hosts/PiZero2W/: host config, serial-ppp.nix, email-proxy.nix, an SD-image variant, and a hardware-configuration.nix placeholder. - Host table entry on nixos-hardware's raspberry-pi-3 profile; the Zero 2 W is the Pi 3's BCM2837 SoC. nixpkgs' linuxPackages_rpi02w is deprecated and warns that the linux-rpi series is being removed in favour of nixos-hardware. - The host owns its firmware partition (hardware.raspberry-pi.firmware), which is what puts the disable-bt and uart0/ctsrts overlays in config.txt so /dev/ttyAMA0 is the RS232 header rather than Bluetooth. uboot.enable keeps the U-Boot -> extlinux boot path the rewritten config.txt would otherwise lose. - packages.aarch64-linux.zero2w-sd-image: the host's own configuration as an installable card. The board has no Ethernet and no free serial port, so a generic image would leave no way in. - The mail proxy comes from the legacy-email-proxy flake, which provides the package and the NixOS module; nothing about it is vendored here. - docs/hosts/pizero2w.md, plus README host table and shared-layer notes. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
45 lines
1.7 KiB
Nix
45 lines
1.7 KiB
Nix
# SD-card image of this host, used exactly once: to bring the board up.
|
|
#
|
|
# Deliberately NOT imported by ./configuration.nix. The flake extends the host
|
|
# with it (see packages.aarch64-linux.zero2w-sd-image in ../../flake.nix), so
|
|
# the card carries the host's own kernel, config.txt and SSH keys rather than a
|
|
# generic installer that then has to be reconfigured over a console this host
|
|
# does not have -- pppd owns the serial port (./serial-ppp.nix).
|
|
#
|
|
# It does not carry the runtime secrets. Seed those into the card's root
|
|
# partition before first boot; see ../../docs/hosts/pizero2w.md.
|
|
{
|
|
config,
|
|
lib,
|
|
modulesPath,
|
|
...
|
|
}:
|
|
{
|
|
imports = [ "${modulesPath}/installer/sd-card/sd-image.nix" ];
|
|
|
|
# sd-image.nix pulls in profiles/all-hardware.nix, which is every driver and
|
|
# firmware blob NixOS knows about. The raspberry-pi-3 profile already carries
|
|
# what this board has, and the card is small.
|
|
hardware.enableAllHardware = lib.mkForce false;
|
|
|
|
image.baseName = "nixos-zero2w";
|
|
|
|
sdImage = {
|
|
# Compressing costs a long single-threaded pass and buys nothing: the image
|
|
# is written straight to a card with dd.
|
|
compressImage = false;
|
|
|
|
# The default 30 MiB does not hold the vendor GPU firmware, U-Boot and the
|
|
# BCM2837 device trees and overlays that nixos-hardware installs here.
|
|
firmwareSize = 128;
|
|
|
|
# The firmware partition is populated by nixos-hardware's firmware module
|
|
# (it takes over sdImage.populateFirmwareCommands); the root side is the
|
|
# stock extlinux install, which no longer arrives with it.
|
|
populateRootCommands = ''
|
|
mkdir -p ./files/boot
|
|
${config.boot.loader.generic-extlinux-compatible.populateCmd} -c ${config.system.build.toplevel} -d ./files/boot
|
|
'';
|
|
};
|
|
}
|