# PLACEHOLDER hardware configuration for the Raspberry Pi 5.
#
# This file is NOT the real generated config -- it exists only so the host
# evaluates in CI before the Pi is provisioned. The machine will not boot from
# it as-is. On first install, regenerate this file on the device with
#   nixos-generate-config --root /mnt
# and replace this placeholder with the output (commit it). See ./README.md.
#
# Like every hardware-configuration.nix in this repo, this file is excluded from
# the formatter and linters (see the pre-commit/treefmt excludes in flake.nix).
{ modulesPath, ... }:
{
  imports = [ (modulesPath + "/installer/scan/not-detected.nix") ];

  nixpkgs.hostPlatform = "aarch64-linux";

  # The Raspberry Pi 5 boots from an SD card / USB with a FAT firmware partition
  # and an ext4 root. Labels match the conventional sd-image layout; the real
  # generated config will use by-uuid device paths instead.
  fileSystems."/" = {
    device = "/dev/disk/by-label/NIXOS_SD";
    fsType = "ext4";
  };

  fileSystems."/boot/firmware" = {
    device = "/dev/disk/by-label/FIRMWARE";
    fsType = "vfat";
  };

  swapDevices = [ ];
}