README.md

@@ -185,6 +185,27 @@ is what a percentage and an estimate that mean something cost — and renders th
 rest itself. Piped to a log it prints a plain line every thirty seconds
 instead, with no carriage returns, and a summary at the end either way.
 
+### If the sync is interrupted
+
+No partially copied track is ever left under a name Rockbox would play. rsync
+writes to a hidden temporary file and only renames it into place once the file
+is complete, and *"by default, rsync will delete any partially transferred file
+if the transfer is interrupted"*. `--partial` is deliberately not used, and
+there is a test asserting it never will be.
+
+After an unclean kill or a power cut a hidden `.track.mp3.XXXXXX` can survive.
+It is not playable, it is not in the source, and the next run's `--delete`
+removes it.
+
+The real risk is not rsync's, it is the filesystem's: FAT32 has no journal, so
+buffers that never reach the card are corruption. The script therefore traps
+`INT` and `TERM` and still flushes and unmounts on the way out, exiting 130.
+Both the normal path and the interrupt path call the same function, so they
+cannot drift apart.
+
+The one case nothing can help with is pulling the cable or the card mid-write.
+Wait for the unmount.
+
 ### Making it faster over a network mount
 
 The transfer is metadata-bound, not throughput-bound: 49,600 files means 49,600

tests/test_sync_to_ipod.py

@@ -204,3 +204,27 @@ def test_directory_timestamps_are_not_set(mirror, tmp_path):
     script = SCRIPT.read_text()
 
     assert "--omit-dir-times" in script
+
+
+def test_an_interrupt_is_trapped_so_the_filesystem_is_flushed():
+    """Ctrl-C during a transfer would otherwise skip the sync and the unmount,
+    leaving a journal-less FAT filesystem with dirty buffers -- which is the
+    corruption this script exists to prevent.
+
+    Structural rather than timed: reproducing a mid-transfer signal needs a
+    payload large enough to be slow, and a test that depends on losing a race
+    is a test that fails in CI for no reason.
+    """
+    script = SCRIPT.read_text()
+
+    assert "trap interrupted INT TERM" in script
+    assert "exit 130" in script
+
+
+def test_the_flush_and_unmount_happen_on_every_exit_path():
+    script = SCRIPT.read_text()
+
+    # Both the normal path and the interrupt path go through the same function,
+    # so one cannot drift from the other.
+    assert script.count("finish\n") >= 2
+    assert "--partial" not in script, "rsync must delete partial files, not keep them"

tools/sync-to-ipod.sh

@@ -204,21 +204,41 @@ else
     printf 'sync-to-ipod: %s files to copy\n' "$total" >&2
 fi
 
+# Flushing and unmounting is the whole reason this is a script, so it has to
+# happen on the way out whichever way that is. Ctrl-C during a transfer would
+# otherwise leave a FAT filesystem with dirty buffers and no journal, which is
+# the corruption this exists to avoid.
+finish() {
+    sync
+    if $unmount; then
+        device=$(findmnt -no SOURCE --target "$destination" 2>/dev/null || true)
+        if [ -n "$device" ]; then
+            printf 'sync-to-ipod: unmounting %s\n' "$device" >&2
+            if command -v udisksctl >/dev/null 2>&1; then
+                udisksctl unmount -b "$device" || umount -- "$destination" || true
+            else
+                umount -- "$destination" || true
+            fi
+            printf 'sync-to-ipod: safe to disconnect\n' >&2
+        fi
+    else
+        printf 'sync-to-ipod: still mounted; unmount before disconnecting\n' >&2
+    fi
+}
+
+interrupted() {
+    trap - INT TERM
+    printf '\nsync-to-ipod: interrupted -- rsync leaves no partial files, but the\n' >&2
+    printf 'sync-to-ipod: filesystem still needs flushing before you pull anything\n' >&2
+    finish
+    exit 130
+}
+
+trap interrupted INT TERM
+
 rsync "${options[@]}" --out-format='%l %n' "$mirror/" "$destination/" |
     python3 "$here/rsync_progress.py" --total "$total" --bytes "$total_bytes"
 status=${PIPESTATUS[0]}
 [ "$status" -eq 0 ] || die "rsync exited $status"
 
-sync
-if $unmount; then
-    device=$(findmnt -no SOURCE --target "$destination")
-    printf 'sync-to-ipod: unmounting %s\n' "$device" >&2
-    if command -v udisksctl >/dev/null 2>&1; then
-        udisksctl unmount -b "$device"
-    else
-        umount -- "$destination"
-    fi
-    printf 'sync-to-ipod: safe to disconnect\n' >&2
-else
-    printf 'sync-to-ipod: still mounted; unmount before disconnecting\n' >&2
-fi
+finish