Merge pull request 'feat: destination handling, live progress and interrupt safety for sync-to-ipod' (#9) from fix/sync-destination-subdirectory into main

Reviewed-on: #9

Dockerfile

@@ -26,6 +26,9 @@ ENTRYPOINT ["music-mirror"]
 FROM runtime AS test
 
 RUN pip install --no-cache-dir pytest
+# sync-to-ipod.sh and its tests need these; the runtime image deliberately does
+# not carry them, and neither does the base.
+RUN apk add --no-cache bash rsync findmnt
 COPY pytest.ini ./
 # Host-side tools; not in the runtime image, but the suite covers them.
 COPY tools ./tools

README.md

@@ -150,13 +150,130 @@ tools/sync-to-ipod.sh /mnt/tank/media/music-mp3 /media/IPOD/Music
 tools/sync-to-ipod.sh -n /mnt/tank/media/music-mp3 /media/IPOD/Music   # dry run
 ```
 
-It refuses to start unless the destination is a mounted FAT filesystem that is
-its own mount point, because `--delete` aimed at the wrong directory empties it
-and does not announce itself. It also excludes `/.rockbox`, the scrobbler logs
+The destination is where the artist folders should end up — normally a
+subdirectory such as `/media/IPOD/Music`, not the card root. A subdirectory is
+the better target: `--delete` is confined to it, and the device path budget is
+derived from it rather than configured, so the two cannot disagree.
+
+It refuses to start unless the destination is on a mounted FAT filesystem. That
+check is also what catches an unmounted device — `/media/IPOD/Music` then
+resolves to the host's own root filesystem, and this refuses to empty that.
+`--help` says all of it. It also excludes `/.rockbox`, the scrobbler logs
 and the various filesystem metadata directories from deletion — the mirror does
 not contain them, and without the exclusion a sync to the card root would
 remove the Rockbox install.
 
+Progress is a single line that rewrites itself:
+
+```
+[ 24%] 12,345/49,600  3.2 GiB/13.1 GiB  4.4 MiB/s  ETA 38m12s  King Gizzard / Petro…
+```
+
+The estimate comes from rsync's `%l`, which gives each file's size as it
+completes. Bytes done over time elapsed is the same arithmetic rsync would do,
+and needs nothing it does not already print. The rate is measured over a
+trailing thirty seconds rather than the whole run, so it follows a device that
+slows down instead of averaging the slowdown away — and it is suppressed
+entirely for the first two seconds, where the window is microseconds wide and
+would report gigabytes per second.
+
+rsync says nothing at all while it builds its file list, which on fifty
+thousand files over USB is minutes of apparent hang, and its own `progress2`
+percentage is computed against a list it has not finished discovering. So the
+script counts first — files and bytes both, a second pass over the tree, which
+is what a percentage and an estimate that mean something cost — and renders the
+rest itself. Piped to a log it prints a plain line every thirty seconds
+instead, with no carriage returns, and a summary at the end either way.
+
+### The Rockbox database
+
+Point `MUSIC_MIRROR_DATABASE_TOOL` at Rockbox's host-side builder and the sync
+rebuilds the database itself, so it never has to happen on the device.
+
+```sh
+git clone --depth 1 https://github.com/Rockbox/rockbox.git
+cd rockbox && mkdir build-db && cd build-db
+../tools/configure --target=ipodvideo --type=d && make -j$(nproc)
+```
+
+It needs a native compiler and SDL2 development headers, not the ARM
+cross-toolchain, and `tools/configure` detects `__aarch64__` correctly. On a
+distribution without `/usr/bin/perl` or `gcc-ar` — NixOS, say — patch the
+shebangs in `tools/*.pl` and pass `AR=ar`.
+
+Building it here rather than on the device is not merely faster. The on-device
+commit sorts the whole index in whatever memory `core_alloc_maximum()` can
+scrape together; on a fifty-thousand-track library it runs for hours or aborts
+outright.
+
+The scan runs against a scratch root — a real `.rockbox` beside a symlink
+standing in for wherever the music lands on the device — so the paths recorded
+are the ones Rockbox will look up, while the **bytes are read from the mirror
+rather than over USB**. Only the dozen `.tcd` files cross to the card.
+
+Cost, measured: the parser makes about 49 reads and 43 seeks per file, probing
+the head for ID3v2 and the tail for ID3v1. On a local disk that is 2,000 files
+in half a second. Over SMB, readahead absorbs most of the reads but the opens
+and the head/tail split are real round trips, so a first full scan is minutes
+rather than seconds. It is a one-time cost: the builder is incremental, and the
+scratch root is kept between runs, so a later pass over unchanged files does no
+metadata reads at all.
+
+If minutes is still too many, run the builder where the mirror is local — on
+the NAS — and copy the `.tcd` files across. There is nothing to parallelise:
+the tool is single-threaded, and two instances cannot produce one database.
+
+### If the sync is interrupted
+
+No partially copied track is ever left under a name Rockbox would play. rsync
+writes to a hidden temporary file and only renames it into place once the file
+is complete, and *"by default, rsync will delete any partially transferred file
+if the transfer is interrupted"*. `--partial` is deliberately not used, and
+there is a test asserting it never will be.
+
+After an unclean kill or a power cut a hidden `.track.mp3.XXXXXX` can survive.
+It is not playable, it is not in the source, and the next run's `--delete`
+removes it.
+
+Interrupting does not, by itself, endanger the filesystem. The kernel flushes
+dirty pages within `dirty_expire_centisecs` — thirty seconds by default — and
+`umount` always syncs before it returns. Losing data needs you to interrupt,
+*and* pull the card inside that window, *and* skip the unmount.
+
+The script still traps `INT` and `TERM` and flushes and unmounts on the way
+out, exiting 130. Not because a Ctrl-C is dangerous, but because it removes the
+manual step and makes the exit deterministic — you get the same "safe to
+disconnect" either way, rather than having to remember which path you took.
+Both paths call the same function, so they cannot drift apart.
+
+What genuinely does lose data is pulling the cable or the card without
+unmounting at all, interrupted or not. FAT32 has no journal. Wait for the
+unmount line.
+
+### Making it faster over a network mount
+
+The transfer is metadata-bound, not throughput-bound: 49,600 files means 49,600
+round trips, and the counting pass doubles that. In rough order of what it is
+worth doing:
+
+| Lever | Why |
+| ----- | --- |
+| Mount the source with `actimeo=60,cache=loose` | SMB defaults to a **one second** attribute cache, so nearly every `stat` goes to the wire — twice, once per pass. This is the single biggest change and it is a mount option, not an rsync flag. |
+| Put the card in a reader for the first load | USB 2.0 through an iPod in disk mode is the floor for the destination. No amount of source tuning gets past it. |
+| `-Q` | Skips the counting pass entirely. Costs the percentage and the estimate, saves a whole walk of the tree. |
+| `--whole-file`, `--omit-dir-times` | Already set. The first stops rsync checksumming destination files it is about to overwrite whole; the second drops a setattr per directory, 6,150 of them. |
+
+**NFS instead of SMB** is worth trying but is not the big win it looks like.
+Its attribute caching defaults are far more generous than SMB's — `acregmax` of
+sixty seconds against `actimeo=1` — which is precisely the gap that
+`actimeo=60` closes on the mount you already have. Bulk read throughput between
+the two is much of a muchness on a gigabit link. Try the mount option first; it
+is one line and needs no change on the NAS.
+
+And if the destination is the iPod rather than a card reader, none of this
+matters much: the source can feed data faster than USB 2.0 through an iPod will
+take it either way.
+
 The unmount is the point of doing this in a script. FAT32 has no journal and
 the device is reached through disk mode, so an interrupted write is corruption
 that needs `fsck.vfat` from another machine.

tests/test_rsync_progress.py

@@ -0,0 +1,180 @@
+import io
+import sys
+from pathlib import Path
+
+import pytest
+
+sys.path.insert(0, str(Path(__file__).resolve().parent.parent / "tools"))
+
+import rsync_progress  # noqa: E402
+
+
+class NotATerminal(io.StringIO):
+    def isatty(self):
+        return False
+
+
+class Terminal(io.StringIO):
+    def isatty(self):
+        return True
+
+
+def run(lines, total=0, out=None, bytes_expected=0):
+    out = out or NotATerminal()
+    rsync_progress.main(
+        ["--total", str(total), "--bytes", str(bytes_expected)],
+        stream=io.StringIO(lines),
+        out=out,
+    )
+    return out.getvalue()
+
+
+def test_the_artist_and_album_are_pulled_from_the_path():
+    assert rsync_progress.album_of("Pendulum/Immersion/01 - Watercolour.mp3") == (
+        "Pendulum / Immersion"
+    )
+
+
+def test_a_shallower_path_degrades_rather_than_failing():
+    assert rsync_progress.album_of("Pendulum/loose.mp3") == "Pendulum"
+    assert rsync_progress.album_of("loose.mp3") == ""
+
+
+def test_directories_are_not_counted():
+    """rsync reports them too, and counting them puts the percentage past 100."""
+    output = run("Artist/\nArtist/Album/\nArtist/Album/track.mp3\n", total=1)
+
+    assert "1/1" in output
+    assert "100%" in output
+
+
+def test_the_percentage_tracks_the_total():
+    output = run("".join(f"A/B/{i}.mp3\n" for i in range(5)), total=10)
+
+    assert "5/10" in output
+    assert "50%" in output
+
+
+def test_without_a_total_it_counts_instead_of_guessing():
+    output = run("A/B/one.mp3\nA/B/two.mp3\n")
+
+    assert "2 files" in output
+    assert "%" not in output
+
+
+def test_a_final_line_is_always_printed():
+    """Otherwise the last state of a rewriting line is whatever it happened to
+    be when the interval last elapsed."""
+    output = run("A/B/one.mp3\n", total=1)
+
+    assert output.endswith("\n")
+    assert "1/1" in output
+
+
+def test_nothing_transferred_still_reports():
+    output = run("", total=0)
+
+    assert "0 files" in output
+
+
+def test_a_log_gets_no_carriage_returns():
+    """A non-terminal filling with \\r and escape codes is unreadable."""
+    output = run("".join(f"A/B/{i}.mp3\n" for i in range(50)), total=50)
+
+    assert "\r" not in output
+    assert "\033" not in output
+
+
+def test_a_terminal_rewrites_one_line():
+    output = run("".join(f"A/B/{i}.mp3\n" for i in range(50)), total=50, out=Terminal())
+
+    assert "\r\033[2K" in output
+
+
+@pytest.mark.parametrize(
+    ("text", "width", "expected"),
+    [
+        ("short", 20, "short"),
+        ("King Gizzard / PetroDragonic Apocalypse", 20, "…agonic Apocalypse"),
+    ],
+)
+def test_long_labels_are_trimmed_from_the_left(text, width, expected):
+    """The album is the informative end, so the artist is what gets cut."""
+    trimmed = rsync_progress.fit(text, width)
+
+    assert len(trimmed) <= width
+    if len(text) > width:
+        assert trimmed.startswith("…")
+        assert text.endswith(trimmed.lstrip("…"))
+
+
+def test_the_size_and_path_are_parsed():
+    assert rsync_progress.parse("5000 Artist/Album/Track.mp3\n") == (
+        5000,
+        "Artist/Album/Track.mp3",
+    )
+
+
+def test_a_filename_containing_spaces_survives():
+    """Splitting on every space would lose most of the library."""
+    assert rsync_progress.parse("1234 Artist/An Album/A Track With Spaces.mp3") == (
+        1234,
+        "Artist/An Album/A Track With Spaces.mp3",
+    )
+
+
+def test_a_bare_path_is_tolerated():
+    """In case this is fed --out-format='%n' by something older."""
+    assert rsync_progress.parse("Artist/Album/Track.mp3") == (0, "Artist/Album/Track.mp3")
+
+
+def test_directory_sizes_do_not_inflate_the_total():
+    """rsync reports directories with a 4096 inode size, which is several
+    megabytes of nothing across six thousand albums."""
+    output = run("4096 Artist/\n4096 Artist/Album/\n5000 Artist/Album/t.mp3\n", total=1)
+
+    assert "4.9 KiB" in output
+    assert "12" not in output.split("Artist")[0]
+
+
+def test_a_rate_is_not_reported_until_it_means_something():
+    """The first files arrive microseconds apart and would give a rate in the
+    gigabytes per second and an ETA of zero."""
+    rate = rsync_progress.Rate()
+    rate.add(100.0, 0)
+    rate.add(100.5, 5_000_000)
+
+    assert rate.per_second() == 0.0
+
+
+def test_a_rate_over_a_long_enough_window_is_reported():
+    rate = rsync_progress.Rate()
+    rate.add(100.0, 0)
+    rate.add(110.0, 10_000_000)
+
+    assert rate.per_second() == pytest.approx(1_000_000)
+
+
+def test_the_window_forgets_the_distant_past():
+    """So the estimate follows a device that slows down rather than averaging
+    the slowdown away."""
+    rate = rsync_progress.Rate(window=30.0)
+    for second in range(0, 100, 10):
+        rate.add(float(second), second * 1_000_000)
+    rate.add(200.0, 100_000_000)
+
+    assert rate.samples[0][0] >= 90.0
+
+
+@pytest.mark.parametrize(
+    ("seconds", "expected"),
+    [(0, "0s"), (45, "45s"), (60, "1m00s"), (1092, "18m12s"), (7500, "2h05m")],
+)
+def test_durations_read_without_arithmetic(seconds, expected):
+    assert rsync_progress.human_duration(seconds) == expected
+
+
+def test_a_summary_is_printed_at_the_end():
+    output = run("5000000 A/B/one.mp3\n", total=1, bytes_expected=5000000)
+
+    assert "copied 4.8 MiB in" in output

tests/test_sync_to_ipod.py

@@ -0,0 +1,273 @@
+"""The guards on sync-to-ipod.sh, which are the substance of the script.
+
+rsync --delete is being aimed at a whole filesystem, so every refusal here is
+protecting against emptying the wrong directory -- a mistake that does not
+announce itself.
+"""
+
+import shutil
+import subprocess
+from pathlib import Path
+
+import pytest
+
+SCRIPT = Path(__file__).resolve().parent.parent / "tools" / "sync-to-ipod.sh"
+
+# Skipped rather than failed where the tools are absent: this is a host-side
+# script, and a machine without rsync is not a machine that would run it.
+REQUIRED = ("bash", "rsync", "findmnt")
+pytestmark = pytest.mark.skipif(
+    not all(shutil.which(tool) for tool in REQUIRED),
+    reason=f"needs {', '.join(REQUIRED)} on PATH",
+)
+
+
+def run(*arguments):
+    return subprocess.run(
+        ["bash", str(SCRIPT), *arguments], capture_output=True, text=True
+    )
+
+
+@pytest.fixture
+def mirror(tmp_path):
+    source = tmp_path / "mirror"
+    (source / "Album").mkdir(parents=True)
+    (source / "Album" / "track.mp3").write_bytes(b"x")
+    return source
+
+
+def test_the_host_root_is_refused(mirror):
+    """Stripping the trailing slash from "/" leaves an empty string, and an
+    earlier version then reported it as "not a directory" instead."""
+    result = run(str(mirror), "/")
+
+    assert result.returncode == 1
+    assert "refusing to sync onto /" in result.stderr
+
+
+def test_an_empty_mirror_is_refused(tmp_path):
+    """Mirroring nothing onto the device would delete everything on it."""
+    empty = tmp_path / "empty"
+    empty.mkdir()
+    destination = tmp_path / "dest"
+    destination.mkdir()
+
+    result = run(str(empty), str(destination))
+
+    assert result.returncode == 1
+    assert "refusing to mirror nothing" in result.stderr
+
+
+def test_syncing_a_directory_onto_itself_is_refused(mirror):
+    result = run(str(mirror), str(mirror))
+
+    assert result.returncode == 1
+    assert "same directory" in result.stderr
+
+
+def test_a_non_fat_destination_is_refused(mirror, tmp_path):
+    """Which is also how an unmounted device is caught: /media/IPOD/Music then
+    resolves to the host's own root filesystem."""
+    destination = tmp_path / "dest"
+    destination.mkdir()
+
+    result = run(str(mirror), str(destination))
+
+    assert result.returncode == 1
+    assert "not FAT" in result.stderr
+    assert "Is the device mounted?" in result.stderr
+
+
+def test_a_missing_destination_is_refused(mirror, tmp_path):
+    result = run(str(mirror), str(tmp_path / "nowhere"))
+
+    assert result.returncode == 1
+    assert "not a directory" in result.stderr
+
+
+def test_a_subdirectory_of_the_device_is_a_valid_target(mirror, tmp_path):
+    """The better target, in fact: --delete is confined to it."""
+    destination = tmp_path / "dest" / "Music"
+    destination.mkdir(parents=True)
+
+    result = run("-f", "-n", str(mirror), str(destination))
+
+    assert result.returncode == 0, result.stderr
+    assert "dry run, nothing was written" in result.stderr
+
+
+def test_the_device_prefix_is_derived_from_the_destination(mirror, tmp_path):
+    """Derived rather than configured, so it cannot disagree with where the
+    files are actually going -- and the device's path limit applies to it."""
+    destination = tmp_path / "dest" / "Music"
+    destination.mkdir(parents=True)
+
+    result = run("-f", "-n", str(mirror), str(destination))
+
+    assert "the device will see this as /" in result.stderr
+
+
+def test_a_dry_run_writes_nothing(mirror, tmp_path):
+    destination = tmp_path / "dest"
+    destination.mkdir()
+
+    run("-f", "-n", str(mirror), str(destination))
+
+    assert list(destination.iterdir()) == []
+
+
+def test_rockbox_is_never_deleted(mirror, tmp_path):
+    """A sync to the card root would otherwise remove the Rockbox install,
+    since the mirror does not contain it."""
+    destination = tmp_path / "dest"
+    destination.mkdir()
+    (destination / ".rockbox").mkdir()
+    (destination / ".rockbox" / "rockbox.ipod").write_bytes(b"firmware")
+    (destination / ".scrobbler.log").write_bytes(b"#AUDIOSCROBBLER/1.1\n")
+    (destination / "Stale.mp3").write_bytes(b"old")
+
+    result = run("-f", "-S", "-U", str(mirror), str(destination))
+
+    assert result.returncode == 0, result.stderr
+    assert (destination / ".rockbox" / "rockbox.ipod").is_file()
+    assert (destination / ".scrobbler.log").is_file()
+    # But a track whose source has gone is still removed. That is the point.
+    assert not (destination / "Stale.mp3").exists()
+    assert (destination / "Album" / "track.mp3").is_file()
+
+
+def test_help_goes_to_stdout_and_exits_clean():
+    """Asking for help is not an error; getting the arguments wrong is."""
+    result = run("--help")
+
+    assert result.returncode == 0
+    assert result.stdout.startswith("usage:")
+    assert result.stderr == ""
+
+
+def test_short_help_behaves_the_same():
+    result = run("-h")
+
+    assert result.returncode == 0
+    assert result.stdout.startswith("usage:")
+
+
+def test_misuse_goes_to_stderr_and_does_not():
+    result = run("only-one-argument")
+
+    assert result.returncode == 2
+    assert result.stderr.startswith("usage:")
+    assert result.stdout == ""
+
+
+def test_the_help_explains_what_the_destination_should_be():
+    """The question this script actually gets asked."""
+    help_text = run("--help").stdout
+
+    assert "/media/IPOD/Music" in help_text
+    assert "artist folders" in help_text
+    assert ".rockbox" in help_text
+
+
+def test_the_help_says_how_to_reach_and_leave_disk_mode():
+    help_text = run("--help").stdout
+
+    assert "Menu+Select" in help_text
+    assert "holding Play" in help_text
+
+
+def test_quick_mode_skips_the_counting_pass(mirror, tmp_path):
+    """Over SMB the walk is the expensive part, and doing it twice for a
+    percentage is not always the trade you want."""
+    destination = tmp_path / "dest"
+    destination.mkdir()
+
+    result = run("-f", "-S", "-U", "-Q", str(mirror), str(destination))
+
+    assert result.returncode == 0, result.stderr
+    assert "skipping the count" in result.stderr
+    assert "files to copy" not in result.stderr
+    assert (destination / "Album" / "track.mp3").is_file()
+
+
+def test_the_delta_algorithm_is_disabled(mirror, tmp_path):
+    """It would read every destination file back over USB to checksum it, to
+    avoid resending an MP3 that has changed in its entirety anyway."""
+    script = SCRIPT.read_text()
+
+    assert "--whole-file" in script
+
+
+def test_directory_timestamps_are_not_set(mirror, tmp_path):
+    """One setattr round trip per directory, across six thousand albums, to set
+    timestamps nothing reads."""
+    script = SCRIPT.read_text()
+
+    assert "--omit-dir-times" in script
+
+
+def test_an_interrupt_is_trapped_so_the_filesystem_is_flushed():
+    """Ctrl-C during a transfer would otherwise skip the sync and the unmount,
+    leaving a journal-less FAT filesystem with dirty buffers -- which is the
+    corruption this script exists to prevent.
+
+    Structural rather than timed: reproducing a mid-transfer signal needs a
+    payload large enough to be slow, and a test that depends on losing a race
+    is a test that fails in CI for no reason.
+    """
+    script = SCRIPT.read_text()
+
+    assert "trap interrupted INT TERM" in script
+    assert "exit 130" in script
+
+
+def test_the_flush_and_unmount_happen_on_every_exit_path():
+    script = SCRIPT.read_text()
+
+    # Both the normal path and the interrupt path go through the same function,
+    # so one cannot drift from the other.
+    assert script.count("finish\n") >= 2
+    assert "--partial" not in script, "rsync must delete partial files, not keep them"
+
+
+def test_the_database_step_is_skipped_without_a_tool(mirror, tmp_path, monkeypatch):
+    """Opt-in, like the scrobbler: absent configuration is not an error."""
+    destination = tmp_path / "dest"
+    destination.mkdir()
+    monkeypatch.delenv("MUSIC_MIRROR_DATABASE_TOOL", raising=False)
+
+    result = run("-f", "-S", "-U", str(mirror), str(destination))
+
+    assert result.returncode == 0, result.stderr
+    assert "no database tool configured" in result.stderr
+
+
+def test_a_missing_database_tool_is_refused(mirror, tmp_path, monkeypatch):
+    destination = tmp_path / "dest"
+    destination.mkdir()
+    monkeypatch.setenv("MUSIC_MIRROR_DATABASE_TOOL", str(tmp_path / "nonexistent"))
+
+    result = run("-f", "-S", "-U", str(mirror), str(destination))
+
+    assert result.returncode == 1
+    assert "not executable" in result.stderr
+
+
+def test_the_database_step_can_be_skipped(mirror, tmp_path, monkeypatch):
+    destination = tmp_path / "dest"
+    destination.mkdir()
+    monkeypatch.setenv("MUSIC_MIRROR_DATABASE_TOOL", str(tmp_path / "nonexistent"))
+
+    result = run("-f", "-S", "-U", "-B", str(mirror), str(destination))
+
+    assert result.returncode == 0, result.stderr
+    assert "not executable" not in result.stderr
+
+
+def test_the_scan_reads_from_the_mirror_not_the_device():
+    """The whole point: tags come off the mirror, only the .tcd files go over
+    USB. Reading 49,600 files through an iPod's USB bridge is the slow path."""
+    script = SCRIPT.read_text()
+
+    assert 'ln -s "$mirror"' in script
+    assert 'cd "$scratch"' in script

tools/rsync_progress.py

@@ -0,0 +1,190 @@
+#!/usr/bin/env python3
+"""Render rsync's per-file output as a single updating status line.
+
+Fed the size and path rsync reports with --out-format='%l %n', one per line.
+The size is what makes an estimate possible: rsync's own rate is not exposed
+per file, but bytes completed over time elapsed is the same arithmetic and
+needs nothing rsync does not already print. Prints one
+line that rewrites itself, showing how far through the transfer is and which
+album is currently going across, rather than either scrolling fifty thousand
+filenames past or -- as rsync does while it builds its file list -- saying
+nothing at all for several minutes.
+
+Falls back to periodic plain lines when stderr is not a terminal, so a log does
+not fill up with carriage returns.
+"""
+
+import argparse
+import collections
+import os
+import shutil
+import sys
+import time
+
+# The estimate is taken over a trailing window rather than the whole run, so it
+# follows a device that slows down instead of averaging the slowdown away.
+RATE_WINDOW_SECONDS = 30.0
+
+# Below this the window is too narrow to divide by: the first few files arrive
+# in microseconds and produce a rate in the gigabytes per second, and an ETA of
+# nothing at all. Better to show neither until the figure means something.
+RATE_MINIMUM_SPAN_SECONDS = 2.0
+
+
+def parse(line):
+    """Return (bytes, path) for one line of rsync output.
+
+    Tolerates a bare path, in case someone runs this against --out-format='%n'.
+    """
+    line = line.rstrip("\n")
+    size, separator, path = line.partition(" ")
+    if separator and size.isdigit():
+        return int(size), path
+    return 0, line
+
+
+def human_bytes(count):
+    size = float(count)
+    for unit in ("B", "KiB", "MiB", "GiB", "TiB"):
+        if size < 1024 or unit == "TiB":
+            return f"{size:.1f} {unit}"
+        size /= 1024
+
+
+def human_duration(seconds):
+    """Return a duration nobody has to do arithmetic on."""
+    seconds = int(seconds)
+    if seconds < 60:
+        return f"{seconds}s"
+    if seconds < 3600:
+        return f"{seconds // 60}m{seconds % 60:02d}s"
+    return f"{seconds // 3600}h{(seconds % 3600) // 60:02d}m"
+
+
+class Rate:
+    """Bytes per second over a trailing window."""
+
+    def __init__(self, window=RATE_WINDOW_SECONDS):
+        self.window = window
+        self.samples = collections.deque()
+
+    def add(self, when, total_bytes):
+        self.samples.append((when, total_bytes))
+        while len(self.samples) > 2 and when - self.samples[0][0] > self.window:
+            self.samples.popleft()
+
+    def per_second(self):
+        if len(self.samples) < 2:
+            return 0.0
+        (first_time, first_bytes), (last_time, last_bytes) = (
+            self.samples[0],
+            self.samples[-1],
+        )
+        elapsed = last_time - first_time
+        if elapsed < RATE_MINIMUM_SPAN_SECONDS:
+            return 0.0
+        return (last_bytes - first_bytes) / elapsed
+
+
+def album_of(path):
+    """Return "Artist / Album" for a mirror-relative path."""
+    parts = [part for part in path.strip("/").split("/") if part]
+    if len(parts) >= 3:
+        return f"{parts[0]} / {parts[1]}"
+    if len(parts) == 2:
+        return parts[0]
+    return ""
+
+
+def fit(text, width):
+    """Trim to the terminal, from the left: the album matters more than the artist."""
+    if width <= 1 or len(text) <= width:
+        return text
+    return "…" + text[-(width - 1) :]
+
+
+def render(done, total, copied, expected, rate, label, width):
+    """Build the status line, giving whatever room is left to the album."""
+    if total > 0:
+        share = min(100, done * 100 // total)
+        head = f"[{share:>3}%] {done:,}/{total:,}"
+    else:
+        head = f"[{done:,} files]"
+
+    if expected > 0:
+        head += f"  {human_bytes(copied)}/{human_bytes(expected)}"
+    if rate > 0:
+        head += f"  {human_bytes(rate)}/s"
+        remaining = expected - copied
+        if remaining > 0:
+            head += f"  ETA {human_duration(remaining / rate)}"
+    head += "  "
+    return head + fit(label, max(0, width - len(head)))
+
+
+def main(argv=None, stream=None, out=None):
+    parser = argparse.ArgumentParser(description=__doc__)
+    parser.add_argument("--total", type=int, default=0, help="files expected")
+    parser.add_argument("--bytes", type=int, default=0, help="bytes expected")
+    parser.add_argument("--interval", type=float, default=0.1, help="seconds between redraws")
+    args = parser.parse_args(argv)
+
+    stream = stream or sys.stdin
+    out = out or sys.stderr
+    interactive = out.isatty()
+    width = shutil.get_terminal_size((100, 24)).columns - 1
+
+    done = 0
+    copied = 0
+    rate = Rate()
+    started = time.monotonic()
+    rate.add(started, 0)
+    last_drawn = 0.0
+    label = ""
+
+    for line in stream:
+        size, path = parse(line)
+        # rsync reports directories too, with a trailing slash and an inode
+        # size. Counting them puts the percentage past a hundred and the byte
+        # total well over what will actually be transferred.
+        if not path or path.endswith("/"):
+            continue
+        done += 1
+        copied += size
+        label = album_of(path) or os.path.basename(path)
+
+        now = time.monotonic()
+        rate.add(now, copied)
+        if interactive:
+            if now - last_drawn >= args.interval:
+                out.write(
+                    "\r\033[2K"
+                    + render(done, args.total, copied, args.bytes, rate.per_second(),
+                             label, width)
+                )
+                out.flush()
+                last_drawn = now
+        elif now - last_drawn >= 30:
+            out.write(
+                render(done, args.total, copied, args.bytes, rate.per_second(), label, width)
+                + "\n"
+            )
+            out.flush()
+            last_drawn = now
+
+    elapsed = max(1e-9, time.monotonic() - started)
+    if interactive:
+        out.write("\r\033[2K")
+    summary = render(done, args.total, copied, args.bytes, 0, label, width).rstrip()
+    out.write(f"{summary}\n")
+    if copied:
+        out.write(
+            f"copied {human_bytes(copied)} in {human_duration(elapsed)}"
+            f" at {human_bytes(copied / elapsed)}/s\n"
+        )
+    out.flush()
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())

tools/sync-to-ipod.sh

@@ -12,46 +12,98 @@
 set -euo pipefail
 
 usage() {
-    cat >&2 <<'USAGE'
+    # Help goes to stdout and exits clean; misuse goes to stderr and does not.
+    local stream=2 code=2
+    if [ "${1:-}" = "help" ]; then
+        stream=1
+        code=0
+    fi
+    cat >&"$stream" <<'USAGE'
 usage: sync-to-ipod.sh [options] <mirror> <destination>
 
   -n  dry run; show what would change and touch nothing
+  -Q  skip the counting pass; no percentage or estimate, but one less walk
+      of the source tree, which over SMB is the expensive part
   -f  copy even if the FAT32 check finds unacceptable paths
   -S  skip submitting the Rockbox scrobbler log to Last.fm
+  -B  skip rebuilding the Rockbox database
   -U  leave the destination mounted afterwards
 
+Rebuilding the database needs MUSIC_MIRROR_DATABASE_TOOL pointing at Rockbox's
+host-side builder (tools/database, built with ./tools/configure --type=d). It
+is skipped with a note when unset. The scan reads tags from the mirror rather
+than from the device, so it costs seconds rather than the hours an on-device
+commit takes -- and on a large library the on-device commit may not finish at
+all.
+
 Submitting scrobbles needs LASTFM_API_KEY and LASTFM_API_SECRET; it is skipped
 with a note when they are unset. Scrobbling is a write method and needs the
 secret, unlike the read-only calls elsewhere in these projects.
 
-The destination must be a mounted FAT filesystem. Reach it with the Apple
-firmware's disk mode: Menu+Select to reboot, then immediately Select+Play.
+The mirror is the directory holding the artist folders. The destination is
+where those folders should end up on the device -- not the card root, unless
+that is genuinely where you want them:
+
+  sync-to-ipod.sh /mnt/tank/media/music-mp3 /media/IPOD/Music
+
+A subdirectory is the better target: --delete is confined to it, and the path
+budget is derived from it, since the device's 260-character limit counts the
+whole path as the device sees it. /.rockbox and the scrobbler logs are never
+deleted wherever you point this.
+
+The destination must be on a mounted FAT filesystem. That check is also what
+catches an unmounted device: /media/IPOD/Music then resolves to the host's own
+root filesystem, and this refuses to empty that.
+
+Progress is one line that rewrites itself, showing the album currently going
+across, how far through the transfer is, the rate, and an estimate of what is
+left. Working the totals out first means a second pass over the tree, which is
+the price of figures that mean something; rsync's own percentage is computed
+against a file list it is still building.
+
+Reach the device with the Apple firmware's disk mode: Menu+Select to reboot,
+then immediately Select+Play. Power off afterwards by holding Play.
 USAGE
-    exit 2
+    exit "$code"
 }
 
 dry_run=false
+quick=false
 force=false
 unmount=true
 scrobble=true
-while getopts ":nfSUh" option; do
+database=true
+for argument in "$@"; do
+    [ "$argument" = "--help" ] && usage help
+done
+while getopts ":nQfSBUh" option; do
     case "$option" in
         n) dry_run=true ;;
+        Q) quick=true ;;
         f) force=true ;;
         S) scrobble=false ;;
+        B) database=false ;;
         U) unmount=false ;;
+        h) usage help ;;
         *) usage ;;
     esac
 done
 shift $((OPTIND - 1))
 [ $# -eq 2 ] || usage
 
+# Trailing slashes are stripped for tidiness, but stripping one from "/" leaves
+# an empty string, and the guard below would then never see the root it is
+# there to refuse.
 mirror=${1%/}
+mirror=${mirror:-/}
 destination=${2%/}
+destination=${destination:-/}
 here=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)
 
 die() {
-    printf 'sync-to-ipod: %s\n' "$1" >&2
+    # Every argument, not just the first: the second half of a message is
+    # usually the half that says what to do about it.
+    printf 'sync-to-ipod: %s\n' "$*" >&2
     exit 1
 }
 
@@ -59,28 +111,41 @@ die() {
 [ -n "$(ls -A "$mirror")" ] || die "mirror $mirror is empty; refusing to mirror nothing"
 [ -d "$destination" ] || die "destination $destination is not a directory"
 
-# --delete makes every one of these load-bearing. A destination that is not its
-# own mount point means the path is wrong, and emptying the wrong directory is
-# not a mistake that announces itself.
+# --delete makes every one of these load-bearing. Emptying the wrong directory
+# is not a mistake that announces itself.
 case "$destination" in
     "" | "/" | "$HOME") die "refusing to sync onto $destination" ;;
 esac
 [ "$(readlink -f "$mirror")" != "$(readlink -f "$destination")" ] ||
     die "mirror and destination are the same directory"
-mountpoint -q -- "$destination" || die "$destination is not a mount point"
 
+# The filesystem the destination sits on, which is the check that matters: a
+# subdirectory of the card is a perfectly good target, and is the better one,
+# because --delete is then confined to it. Being FAT is also what proves the
+# card is mounted at all -- an unmounted /media/IPOD/Music resolves to the
+# host's own root filesystem, and this refuses to empty that.
 filesystem=$(findmnt -no FSTYPE --target "$destination")
+mounted_on=$(findmnt -no TARGET --target "$destination")
 case "$filesystem" in
     vfat | exfat) ;;
     *)
-        $force || die "$destination is $filesystem, not FAT; pass -f if that is deliberate"
+        $force ||
+            die "$destination is on a $filesystem filesystem, not FAT." \
+                "Is the device mounted? Pass -f if this is deliberate."
         printf 'sync-to-ipod: destination is %s, not FAT\n' "$filesystem" >&2
         ;;
 esac
 
+# What the device will call this directory, which is what its path limit
+# applies to. Derived rather than configured, so it cannot disagree with where
+# the files are actually going.
+device_prefix=${destination#"$mounted_on"}
+device_prefix="/${device_prefix#/}"
+printf 'sync-to-ipod: the device will see this as %s\n' "$device_prefix" >&2
+
 if $force; then
     printf 'sync-to-ipod: skipping the FAT32 check\n' >&2
-elif ! python3 "$here/check_fat32.py" "$mirror"; then
+elif ! python3 "$here/check_fat32.py" --device-prefix "$device_prefix" "$mirror"; then
     die "the mirror holds paths FAT32 will not take; run music-mirror with --fat32-safe"
 fi
 
@@ -101,36 +166,138 @@ fi
 # asking for them produces a screenful of errors and a non-zero exit.
 # --modify-window=2 because FAT stores mtimes to two-second resolution, without
 # which every file looks changed and the whole library is copied every time.
+# --whole-file is already the default when both ends are local paths, and an
+# SMB or FAT mount counts as one, but stating it documents that the delta
+# algorithm is deliberately not wanted: it would read every destination file
+# back over USB to compute a checksum, to save sending an MP3 that has changed
+# entirely anyway.
+#
+# --omit-dir-times drops a setattr round trip per directory. Across six
+# thousand album folders on a FAT card that is six thousand operations to set
+# timestamps nothing reads.
+options=(--recursive --times --delete --modify-window=2 --whole-file --omit-dir-times)
 # --delete removes tracks whose source has gone, which is the point. It would
 # also remove everything on the device that the mirror does not contain -- and
 # if the destination is the card root that means /.rockbox, the Rockbox install
 # itself. Excluded paths are not deleted unless --delete-excluded is given,
 # which it never is here.
-options=(--recursive --times --delete --modify-window=2 --human-readable --info=progress2)
 for owned in "/.rockbox" "/.scrobbler.log" "/.scrobbler.log.*" "/.playlist_control" \
     "/System Volume Information" "/.Spotlight-V100" "/.Trashes" "/.fseventsd"; do
     options+=(--exclude "$owned")
 done
-$dry_run && options+=(--dry-run --verbose)
 
 printf 'sync-to-ipod: %s -> %s\n' "$mirror" "$destination" >&2
-rsync "${options[@]}" "$mirror/" "$destination/"
 
 if $dry_run; then
+    rsync "${options[@]}" --dry-run --verbose "$mirror/" "$destination/"
     printf 'sync-to-ipod: dry run, nothing was written\n' >&2
     exit 0
 fi
 
+# rsync says nothing at all while it builds its file list, which on fifty
+# thousand files over USB is minutes of apparent hang. Counting first costs a
+# second pass over the tree but means the transfer can show a real percentage
+# rather than a number that grows as rsync discovers more work.
+total=0
+total_bytes=0
+if $quick; then
+    printf 'sync-to-ipod: skipping the count; no percentage or estimate\n' >&2
+else
+    printf 'sync-to-ipod: working out what needs copying...\n' >&2
+    # %l is the file's size, which is what makes an estimate possible.
+    # Directories are dropped: rsync reports those too, with an inode size that
+    # would inflate the total by several megabytes of nothing.
+    counted=$(rsync "${options[@]}" --dry-run --out-format='%l %n' "$mirror/" "$destination/" |
+        awk '!/\/$/ { files++; bytes += $1 } END { print files + 0, bytes + 0 }')
+    total=${counted% *}
+    total_bytes=${counted#* }
+    printf 'sync-to-ipod: %s files to copy\n' "$total" >&2
+fi
+
+# Flushing and unmounting is the whole reason this is a script, so it has to
+# happen on the way out whichever way that is. Ctrl-C during a transfer would
+# otherwise leave a FAT filesystem with dirty buffers and no journal, which is
+# the corruption this exists to avoid.
+finish() {
     sync
     if $unmount; then
-    device=$(findmnt -no SOURCE --target "$destination")
+        device=$(findmnt -no SOURCE --target "$destination" 2>/dev/null || true)
+        if [ -n "$device" ]; then
             printf 'sync-to-ipod: unmounting %s\n' "$device" >&2
             if command -v udisksctl >/dev/null 2>&1; then
-        udisksctl unmount -b "$device"
+                udisksctl unmount -b "$device" || umount -- "$destination" || true
             else
-        umount -- "$destination"
+                umount -- "$destination" || true
             fi
             printf 'sync-to-ipod: safe to disconnect\n' >&2
+        fi
     else
         printf 'sync-to-ipod: still mounted; unmount before disconnecting\n' >&2
     fi
+}
+
+interrupted() {
+    trap - INT TERM
+    printf '\nsync-to-ipod: interrupted -- rsync leaves no partial files, but the\n' >&2
+    printf 'sync-to-ipod: filesystem still needs flushing before you pull anything\n' >&2
+    finish
+    exit 130
+}
+
+trap interrupted INT TERM
+
+rsync "${options[@]}" --out-format='%l %n' "$mirror/" "$destination/" |
+    python3 "$here/rsync_progress.py" --total "$total" --bytes "$total_bytes"
+status=${PIPESTATUS[0]}
+[ "$status" -eq 0 ] || die "rsync exited $status"
+
+# Rockbox reads its database from .tcd files in .rockbox. Building them here
+# rather than on the device is not just faster: the on-device commit sorts the
+# whole index in whatever memory it can scrape together, and on a large library
+# it runs for hours or dies outright.
+#
+# The scan reads tags through a scratch root -- a real .rockbox beside a symlink
+# standing in for where the music lands on the device -- so the paths recorded
+# match what Rockbox will look up, while the bytes are read from the mirror
+# instead of over USB. The scratch is kept between runs because the builder is
+# incremental: a second pass over unchanged files does no work at all.
+rebuild_database() {
+    local tool=${MUSIC_MIRROR_DATABASE_TOOL:-}
+    if [ -z "$tool" ]; then
+        printf 'sync-to-ipod: no database tool configured, skipping the database\n' >&2
+        return 0
+    fi
+    [ -x "$tool" ] || die "$tool is not executable"
+
+    local device_rockbox="$mounted_on/.rockbox"
+    if [ ! -d "$device_rockbox" ]; then
+        printf 'sync-to-ipod: no .rockbox on the device, skipping the database\n' >&2
+        return 0
+    fi
+
+    local scratch="${XDG_CACHE_HOME:-$HOME/.cache}/music-mirror/database"
+    mkdir -p "$scratch/.rockbox"
+
+    # Rebuild the symlink layout each time; the mirror path or the device
+    # prefix may have changed since the last run.
+    find "$scratch" -maxdepth 1 -type l -delete
+    if [ "$device_prefix" = "/" ]; then
+        ln -s "$mirror"/* "$scratch/" 2>/dev/null || true
+    else
+        local under=${device_prefix#/}
+        rm -rf "${scratch:?}/${under%%/*}"
+        mkdir -p "$scratch/$(dirname "$under")"
+        ln -s "$mirror" "$scratch/$under"
+    fi
+
+    printf 'sync-to-ipod: building the database from the mirror...\n' >&2
+    ( cd "$scratch" && "$tool" ) >/dev/null || die "the database build failed"
+
+    cp -- "$scratch"/.rockbox/*.tcd "$device_rockbox/" ||
+        die "could not copy the database onto the device"
+    printf 'sync-to-ipod: database copied to %s\n' "$device_rockbox" >&2
+}
+
+$database && rebuild_database
+
+finish